カタログ >
BORIDE >
U-LAP Profilers and Holders

U-LAP Profilers and Holders
1 / 2ページ

カタログの抜粋

U-LAP Profilers and Holders The perfect tool for polishing fine detail areas, ribs and slots. U-LAP Air Profilers offer excellent performance with BORIDE Mold Polishing Stones, Ceramic Super Stones, Cristones®, and other detail polishing stones. U-LAP AIR PROFILERS U-LAPs are the perfect tool for polishing fine detail areas and offer excellent performance with BORIDE’s Ceramic Super Stones, Cristones®, CNB-80 & CNB-120, Ceramic Diamond Stones, and 1/8 x 1/2 or Smaller Polishing Stones (1/4 x 1/2 holder available with some models). • Use at 80 PSI (maximum 85 PSI) and must be used with oil in the line • U-LAPS require the use of a 3-in-1 Filter, Regulator, Lubricator such as BORIDE’s Item MFRL2-G U-LAP Contact your Local Distributor Today! WWW.BORIDEABRASIVES.COM INFO@BORIDEABRASIVES.COM PHONE 231.929.2121 TOLL FREE 800.662.0336 FAX 231.946.2852 2615 Aero Park Drive | Traverse City, M

カタログの1ページ目を開く

U-LAP Profilers and HoldersThe perfect tool for polishing fine detail areas, ribs and slots.U-LAP Air Profilers offer excellent performance with BORIDE Mold Polishing Stones, Ceramic Super Stones, Cristones®, CNB, and Ceramic Diamond Stones. U-LAP HOLDERS The Stone Holders included with BORIDE U-LAP Profilers vary depending on the model. Holders not included can be purchased separately. The table below outlines which stone holders are included with each U-LAP model, which holders are optional and which holders are not available for certain units.

カタログの2ページ目を開く