カタログ >
Bonfiglioli >
Wind Solutions

Wind Solutions
1 / 24ページ

カタログの抜粋

Forever Forward Wind Solutions

Innovative solutions for renewable energies For more than 30 years, Bonfiglioli has provided dedicated integrated solutions to the wind industry. The combined expertise in the designing and manufacturing of gearboxes in association with years of experience in application on wind turbines has enabled Bonfiglioli to become a global top player. One out of every three wind turbines globally uses a Bonfiglioli gearbox. The result is a complete package dedicated to the wind energy sector which seamlessly enables the control of energy generation, from rotor blade positioning with a pitch drive to...

カタログの3ページ目を開く

7TW series - the solution specifically designed for yaw drive applications. More compact than existing solutions, this innovative system for nacelle orientation control is now equipped with integrated motor and brake and is inverter ready. The new design incorporates a special feature for quick installation and setting and grants simpler maintenance over the product lifetime. The yaw control multistage planetary gearmotor is perfect for wind turbines from 1.5 MW to 3.5 MW, both for onshore and offshore applications. An Innovative design system: • Smaller dimensions with the same...

カタログの4ページ目を開く

HEIGHT SAVED Technical key characteristics: Series: 7TW Size: 712 TW Rated dynamic torque: 50 kNm Peak static torque: 110 kNm Reduction ratio: from 600 to 3000 Pinion module: from 16 to 20 Motor size: IEC100 integrated Parking brake: integrated Inverter: optionally integrated 7 TW standard series 7 TW with optional integrated inverter SMALLER Integrated AC motor flange and brake decreases height by 20%* HEIGHT REDUCTION* INTEGRATED INVERTER SIMPLER Less bolted connections and only 2-piece housing 11%* less components LIGHTER Total unit weight reduced by 8%* STANDARD YAW DRIVE: 3 sections,...

カタログの5ページ目を開く

This patented solution integrates the load cell into the gearbox. The output signal from the transmitter can: • Shut down the e-motor if necessary • Reduce the input power (e.g. by frequency converter) • Elaborate the information by customer PLC (e.g. creating working group graphic in real time) Technical Information • The Load Cell is located between the e-motor and first stage of transmission • It can be fixed with all IEC and gear stages just by changing the interface component Applications Used in all applications with an e-motor where it is necessary to control and manage the input...

カタログの6ページ目を開く

For all applications of yaw and pitch drives for the monitoring of load peaks, Bonfiglioli offers its customers a solution that is protectively integrated into the gear motor. The integrated load cell quickly and precisely measures torque and enables torque monitoring in real time. The system provides an automatic engine shut-down to protect the drive or reduce the capacity of the frequency converter and provides information to the PLC. The system also has an anti-seize function which prevents blockages. Rated Torque Range 8000 ... 120000 Nm Peak Torque Range 5000 ... 300000 Nm Reduction...

カタログの7ページ目を開く

Torque Limiter Reduce downtime and prevent maintenance

カタログの8ページ目を開く

For both Yaw and Pitch drive applications, Bonfiglioli has created a torque limiter which significantly reduces downtime in the case of stopping the transmission of wind turbines when peak torque has been reached and also reduces maintenance costs. Rated Torque Range 8000 ... 120000 Nm Peak Torque Range 5000 ... 300000 Nm Reduction Ratios 1:600 ... 3000 Key Features of Torque Limiter • External to gearbox* for fast and easy replacement - no longer necessary to replace the entire gearbox • Limits peak of torque to avoid failure • Shuts down gearbox if torque limit is reached • Fully...

カタログの9ページ目を開く

PITCH DRIVE ACTIVE CUBE Inverter Pitch Also with Integrated Inverter

カタログの10ページ目を開く

Bonfiglioli products are used in the latest state-of-the-art wind turbines to control the necessary functions of pitch and yaw drives systems. The 700T series planetary speed reducers are used by a number of leading wind turbine manufacturers thanks to their advanced technical features, creating the highest level of performance. Torque Range 2500 ... 300000 Nm Gear Ratios 60 ... 3000 Key Features • Flange mounted • Output shaft: splined or with integral pinion • Rugged construction • High torque capacity • Output shafts supported by heavy duty bearings General features • High transmissible...

カタログの13ページ目を開く

NOMINAL TORQUE PEAK STATIC TORQUE RANGE OF RATIOS AVAILABLE PINION MODULE Gearboxes for 1.0 to Gearboxes for 2.0 to 4.0 MW Gearboxes for 5.0 to 2.0 MW wind turbines wind turbines 8.0 MW wind turbines

カタログの14ページ目を開く

NOMINAL TORQUE PEAK STATIC TORQUE RANGE OF RATIOS AVAILABLE PINION MODULE The indicated data are for reference only; please contact Bonfiglioli for more detailed information. 707T3N Series Gearboxes for 1.0 to 2.0 MW wind turbines 707T3N+BN132 Series Gearboxes for 1.0 to 2.0 MW wind turbines

カタログの15ページ目を開く

Overall dimensions Combined version Worm gearbox - Planetary gearbox Inline version Planetary gearbox Right angle version Planetary gearbox D1 D4 D3 Output version F (short) Output version N (long) Output version U (pinion supported) The indicated data are for reference only; please contact

カタログの16ページ目を開く

TYPE 4 POLES POWER kW Other sizes available. The lEC-normalized BN motors comply with all the applicable international standards, including the EMC and LV Directives. They are available in the foot and the flange mounting version, the latter in both the IM B5 and the IM B14 configuration. Single and dual polarity versions are available; AC and DC brake designed to provide fail-safe operation, granting further flexibility to the system. Finally, all BN motors are inverter duty. Power Range for wind turbine drives From 0.25 kW up to 30 kW Frame Sizes From IEC 71 up to 200 Pole Numbers 4,...

カタログの17ページ目を開く

The lEC-normalized BE motors comply with IEC 60034-30:2008 (efficiency classes) and all the applicable international standards, including the EMC and LV Directives. They are available in the 0.75 - 22 kW range in the foot and the flange mounting version, the latter in both the IM B5 and the IM B14 configuration. Single pole version available with generally, two brake options offered, one DC and one AC supply, lending further flexibility to the system. Finally, all motors are inverter duty. Power Range (4 pole) 0.75 kW ... 22 kW Frame Sizes 80B ... 180L Pole Numbers 2, 4, 6 Mounting...

カタログの18ページ目を開く

Wind Solutions 1 / 24ページ

カタログの抜粋

Bonfiglioliのすべてのカタログと技術パンフレット

Wind Solutions
1 / 24ページ