カタログ >
BinMaster >
Digital Panel Meter Display

Digital Panel Meter Display
1 / 8ページ

カタログの抜粋

Super-Bright LEDs If ] ur Brightest Display Ever |MJ FEATURES • Modbus® RS-485 RTU Serial Communications as Master, Slave, or Snooper • RS-485 Serial Communications Standard • Scan up to 16 Modbus Process Variable • Addition, Difference, Average, Multiplication, Division, Min, Max, Weighted Average, Ratio, Concentration, & More • Large Dual-Line 6-Digit Display, 0.60” & 0.46” • Optional SunBright Display Models for Outdoor Applications • NEMA 4X, IP65 Front • Input Power Options Include 85-265 VAC or 12-24 VDC • Programmable Display & Function Keys • 32-Point, Square Root, or Exponential Linearization • Multi-Pump Alternation Control • 2 or 4 Relays + Isolated 4-20 mA Output Options • External 4-Relay & Digital I/O Expansion Modules • Onboard USB and ScanView Programming Software SIHmaster www.binmast

カタログの1ページ目を開く

Dual-Line On-Board Serial Modbus Display UV Resistant Sunlight Readable Front Panel NEMA 4X Rated Rugged Front Programmable Function Keys User Configurable Display (Showing custom tag) Alarm Status Indicators Take Advantage of Your Modbus enabled Transmitters Standard LED and Optional SunBright LED Display Models By using the Modbus signal from your existing level sensors, you will open up a whole new dimension of display possibilities. Paired with a BinMaster DPM-100 Modbus Display, you can display multiple variables including level, interface level, density, temperature, and more. The...

カタログの2ページ目を開く

Dual-Line On-Board Serial Modbus Display Modbus Application Capabilities The BinMaster DPM-100 Displays can communicate with any Modbus device using the ever-popular Modbus communications protocol. Take advantage of the Modbus capabilies in the level and flow transmitters you already have by using Master Mode to read more data, more accurately. Possible applications include: • Use Master Mode to scan the top level, interface level, and temperature from Modbus multivariable level transmitters. • Use Master Mode to display the flow rate, tag, and units, for multiple Modbus-enabled flow...

カタログの3ページ目を開く

Dual-Line On-Board Serial Modbus Display Digital communications Typical Modbus Application Example RS-485 Serial Communications Standard The DPM-100 includes an internal RS-485 serial communications module. This may be wired for full-duplex, 5-wire RS-485, or half-duplex 3-wire RS-485. ScanView Software BinMaster’s free ScanView PC-based programming software allows the operator to easily configure, monitor, and datalog a DPM-100 scanner from a PC (available for download at www.binmaster.com) with a serial adapter. The software can save this data to the scanner and/or PC. ScanView greatly...

カタログの4ページ目を開く

Dual-Line On-Board Serial Modbus Display OUTPUTS Interlock Relay(s) Each output of the DPM-100 may be assigned to any single PV, Modbus PV, or math PV. The output will reflect the state of that assigned variable at all times during scanning. Relay Outputs The DPM-100 has up to four 3 A Form C relays (SPDT) with multiple power loss fail-safe options. Relays can be configured for proper protective action upon input loop break. Relay ON and OFF delay times are user adjustable. Up to eight front panel indicators show alarm and/ or relay state. All relays can be configured for 0-100%...

カタログの5ページ目を開く

Dual-Line On-Board Serial Modbus Display NEMA 4 & 4X FIELD ENCLOSURES Except where noted all specifications apply to operation at +25°C. BinMaster offers a variety of rugged enclosures that provide a high degree of protection against harsh operating environments. General Thermoplastic and stainless steel NEMA 4X, and painted steel NEMA 4 Input/Output: Modbus RTU over RS-485 enclosures for up to 10 DPM-100 meters are available. Display: Upper display: 0.60" (15 mm) high. Lower display: 0.46" (12 mm) high. Both are 6 digits (-99999 to 999999), red LEDs Display Intensity: Eight user selectable...

カタログの6ページ目を開く

Dual-Line On-Board Serial Modbus Display Modbus Serial Communications Protocol: Modbus RTU Meter Address/Scanner iD: 1 - 247 Baud Rate: 300 - 19,200 bps Transmit Time Delay: Programmable between 0 and 199 ms Data: 8 bit (1 start bit, 1 or 2 stop bits) Parity: Even, odd, or none with 1 or 2 stop bits byte-to-byte Timeout: 0.01 - 2.54 seconds Turn Around Delay: Less than 2 ms (fixed) operating Modes: MASTER: Processes data read from Modbus RTU slave devices. It polls up to 16 process variables from 1 to 16 slave devices. The Master is capable of scanning the selected PVs, scale the data,...

カタログの7ページ目を開く

Dual-Line On-Board Serial Modbus ScannerORDERING iNFORMATiON DPM-100 Decimal Modbus Scanner Models Disclaimer The information contained in this document is subject to change without notice. BinMaster makes no representations or warranties with respect to the contents hereof, and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose. ©2018 BinMaster. All rights reserved. Division of Garner Industries 7201 North 98th Street | Lincoln, NE 68507-9741 | (402) 434-9102

カタログの8ページ目を開く