UPSIC-2403
1 / 5ページ

カタログの抜粋

Fanless Delivery Operation Extended 24 V DC / 3 A  Regulated voltage at backup  Supercaps for energy storage  Maintenance-free  High cycle stability > 500 000  Charge time <60 sec at maximum charge current  Extended temperature range -20…+70 °C  Compact design  Active reverse polarity protection  Power Fail signal via relay, RS232 connection  Intelligent charge sharing Te c h n i c a l d a t a Input voltage Input current Output power Output voltage battery mode Output voltage normal mode Output current Output ripple Efficiency Charge current Charging method Storage type Charging time Backup time Protection Temperature Humidity Dimensions (W x D x H) Weight (net) 24 VDC (22.5…30 V DC) 3.5 A 70 W 24 VDC ±2 % regulated Vin–0.2 V at 100 % load 3A ≤40 mV 94 % (VSupercap 9.5V, Iout 1.25 A) Depending on load up to 6.2 A CC (VSupercap) CC / CV Supercaps 4x 100 F <60 sec at maximum charge current @ 4x 100 F See diagram Overcurrent protection – Non LATCH Active reverse polarity protection Operating: -20…+70 °C / Storage: -20…+70 °C Operating: 10…85 % RH, non-condensing / Storage: 10…90 % RH, non-condensing 135 x 79.5 x 26 mm incl. supercaps @ 4x 100 F 0.17 kg @ 4x 100 F DC UPS Bicker Elektronik GmbH | 86609 Donauwö

カタログの1ページ目を開く

Optional Accessories [>[>[> For detailed information please visit our website www.bicker.de and refer to the article number. PSZ-1036 | Input cable 3-pole, length 500mm, AWG 18, ends open PSZ-1037 | Output cable 2-pole, length 500mm, AWG 18, ends open PSZ-1063 | ^Extension module pExtension module for DC2412-UPS(LD) -UPSIC-2403 - UPSIC-1205 PSZ-1046 / PSZ-1048 | Interface cable Interface cable for UPSIC and DC2412, PSZ-1046: IDC 2.0 to SUB-D 9 pin female, PSZ-1048: IDDC 2.0 to IDC 2.54 PSZ-1043 / PSZ-1044 | Interface cable For UPSIC and DC2412-UPS (-LD), PSZ-1043: TP connector wire open...

カタログの2ページ目を開く

Output current Parameters of the test system for the backup curve (calculated from test results with 12V type) Type: CIE MSM300M JB032GS SN: CIE164905767 OS Microsoft Windows 10 Enterprise Evaluation Version 1511 Build 10586.589 (2016/09/16) Test Software BurnInTest V7.1 Pro UPS Control Center The UPS software is available for free download directly on the product page at www.bicker.de. Bicker Elektronik GmbH | 86609 Donauworth | Germany Tel. +49 906 70595-0 | info@bicker.de | www.bicker.de

カタログの3ページ目を開く

UPS systems Relay contact for Power Fail Power Fail = 0 Q 0.5 A @ 125 VAC 1 A @ 24 VDC 04 RTS signal (Supply voltage, max. 12 V) 05 NC 06 CTS signal (Low = Power Fail; High = Power OK) SMB alert GND XSDA I2C VOut XSCL |2C LED D302 RED Caps charging state < 90% D301 RED Power fail, backup mode D201 GREEN Normal mode Bicker Elektronik GmbH | 86609 Donauworth | Germany Tel. +49 906 70595-0 | info@bicker.de | www.bicker.de

カタログの4ページ目を開く

UPS systems Interface schematic J301 J301, PIN1 (DCD ON PC OR HOST) CABLE CONNECTED R346 4k7 J301, PIN4 (RTS ON PC OR HOST) USED AS SUPPLY J301, PIN2 (DSR PC OR HOST) CAPS CHANGE STATE High CAP<90% J301, PIN6 (CTS ON PC OR HOST) Power Fail Low Internal connection Power Fail High Low CAP <90% Internal connection High CAP >90% or Full Charged Specification is subject to change without notice. Errors excepted. Status as at: 04.07.2018 Recommended power supplies from Bicker Elektronik  Additional recommendations on www.bicker.de BET-0924-T BET-1024M BED-12024 BEN-10024 90 Watt 100 Watt 120...

カタログの5ページ目を開く

UPSIC-2403 1 / 5ページ

カタログの抜粋

Bicker Elektronik GmbHのすべてのカタログと技術パンフレット

UPSIC-2403
1 / 5ページ