カタログ >
Beamex >
Beamex MC2-IS

Beamex MC2-IS
1 / 12ページ

お気に入りに追加する　

カタログの抜粋

INTRINSICALLY SAFE MULTIFUNCTION CALIBRATOR lazardous environments

カタログの1ページ目を開く

Practical tool for calibration in hazardous environments

カタログの2ページ目を開く

The ATEX- and IECEx- certified MC2-IS is a compact calibrator for hazardous environments The MC2-IS intrinsically safe multifunction calibrator is an ATEX- and IECEx- certified calibrator designed for use in potentially explosive environments such as offshore platforms, oil refineries, chemical and petrochemical plants where inflammable gases may be present. It connects to almost 20 available Beamex intrinsically safe external pressure modules. The calibrator has a compact size and design. Main features of MC2-IS Compact and user-friendly The MC2-IS is a compact, lightweight, portable...

カタログの3ページ目を開く

The MC2-IS general specifications General Specifications General Display Weight Dimensions Keyboard Battery type Charging time Charger supply Battery operation Operating temperature Operating temperature when charging batteries 60 mm x 60 mm (2.36" x 2.36"), 160 x 160 pixels LCD, backlit 1070 g (2.3 lbs) 215 mm (8.5") x 102 mm (4") x 49 mm (1.9") (d/w/h) Membrane keyboard Rechargeable NiMH, 1700 mAh, 4.8V DC 12 hours 100 … 240 VAC, 50–60 Hz 12 hours in measurement mode, backlight off. 4 hours when sourcing a loop, backlight continuously on. −10 … 50 °C (14 … 122°F) 0 … 35 °C (32 … 95°F)...

カタログの5ページ目を開く

Electrical measurements Frequency measurement 0.0027 … 50 000 Hz Range Specification valid from –10 to 50 °C (14 … 122°F) Input impedance Trigger level −1 … 14 V in 1 V steps and open collector inputs Minimum signal amplitude Supported units Gate period Temperature coefficient 1) Uncertainty includes reference standard uncertainty, hysteresis, non-linearity, repeatability and typical long-term stability for the mentioned period (k=2). Pulse counting 0 … 9 999 999 pulses Feature Input impedance Trigger level −1 … 14 V in 1 V steps and open collector inputs Minimum signal amplitude 2 Vpp...

カタログの6ページ目を開く

Pressure measurement Internal Pressure Modules (IPM) Internal Module (3 Also enables absolute pressure measurement for the above pressure inputs. When using the barometric option, add 0.1 kPa (0.0146 psi) uncertainty for absolute pressure measurement. Temperature coefficient < ±0.001 % RDG / °C outside 15 … 35 °C. < ±0.0006 % RDG /°F outside 59 … 95°F 2 × Range G 1/8" female with G 1/8" male (ISO 228/1) 60° internal cone adapter IPM160: G 1/8” female Wetted parts: AISI316 stainless steel, Nitrile rubber. Pa, hPa, kPa, MPa, mbar, bar, lbf/ft2, psi, ozf/in2, gf/cm2, kgf/cm2, kgf/m2, kp/cm2,...

カタログの7ページ目を開く

mV measurement (T/C-terminals) −25 … 150 mV Range Temperature coefficient < ±0.0015 % RDG / °C outside of 18 … 28 °C < ±0.0008 % RDG / °F outside of 64.4 … 82.4°F > 10 MΩ V, mV, µV 3 / second Input impedance Supported units Display update rate mV generation (T/C-terminals) −25 … 150 mV Range Temperature coefficient Maximum load current Load effect Supported units Voltage generation −3 … 11 V Range Temperature coefficient < ±0.0015 % RDG / °C outside of 18 … 28 °C < ±0.0008 % RDG / °F outside of 64.4 … 82.4°F 1 mA < 50 µV/mA V, mV, µV Maximum load current Load effect Supported units mA...

カタログの8ページ目を開く

Resistance measurement 0 … 4000 Ω Range Temperature coefficient < ±0.0015 % RDG / °C outside of 18 … 28 °C < ±0.0008 % RDG / °F outside of 64.4 … 82.4°F Pulsed, bi-directional 1 mA (0..500 Ω), 0.2 mA (>500 Ω) Ω, kΩ 3 / second Measurement current Supported units Display update rate Resistance simulation 0 … 4000 Ω Range 0.04 % RDG or 30 mΩ (whichever is greater) 0.04 % RDG or 30 mΩ (whichever is greater) Temperature coefficient < ±0.0015 % RDG / °C outside of 18 … 28 °C < ±0.0008 % RDG / °F outside of 64.4 … 82.4°F 4 mA (0 … 812 Ω) Iexc × Rsim < 3.25 V (812 … 4 000 Ω) 1 ms Ω, kΩ Maximum...

カタログの9ページ目を開く

Thermocouple measurement and simulation Thermocouple types available as standard Type Temperature coefficient < ±0.0015 % of thermovoltage / °C outside of 18 … 28 °C < ±0.0008 % of thermovoltage / °F outside of 64.4 … 82.4°F < ±0.0015 % of thermovoltage / °C outside of 18 … 28 °C < ±0.0008 % of thermovoltage / °F outside of 64.4 … 82.4°F Input impedance Supported units Display update rate Maximum load current Load effect Internal Reference Junction Range (°C)

カタログの10ページ目を開く

SENSOR TYPE RANGE RESOLUTION MEASUREMENT 1 YEAR SIMULATION 1 YEAR Temperature coefficient Maximum Resistance excitation current Supported units Display update rate RTD TYPES AVAILABLE AS STANDARD 1) Uncertainty includes reference standard uncertainty, hysteresis, non-linearity, repeatability and typical long-term stability for the mentioned period. (k=2). STANDARD ACCESSORIES • User guide • Calibration certificate • Internal rechargeable NiMH battery pack + battery charger • Test leads and clips OPTIONAL ACCESSORIES • Pressure T-hose • Soft carrying case • Connection cable for external...

カタログの11ページ目を開く

INTRINSICALLY SAFE MULTIFUNCTION CALIBRATOR The MC2-IS intrinsically safe multifunction calibrator is an ATEX- and IECEx- certified calibrator designed for use in potentially explosive environments such as offshore platforms, oil refineries, chemical and petrochemical plants where inflammable gases may be present. It connects to almost 20 available Beamex intrinsically safe external pressure modules. The calibrator has a compact size and design. Compact and user-friendly The MC2-IS is a compact, lightweight, portable calibrator with a large graphical display, multilingual interface and full...

カタログの12ページ目を開く