Model 664F(a)
1 / 3ページ

カタログの抜粋

Inner-Cavity Pressure Sensors The 664F(a) pressure sensor which provides outstanding thermal stability and high accuracy is based on the BCM high-quality metal foil strain gauge. The sensor features all welded structure so there is no O-ring seal inside the sensor body. This model has inner-cavity structure which is suitable for pressure measurement of gases or dilute fluids. The sensor has its process connection and electronics housing connection with threads. The entire sensor body is weldable in order to give more possibility for connection ways. • rugged and fully welded structure • reliable metal foil strain gauge technology • compensated temperature range: -20 ~ +85 °C • excited by either current or voltage • industrial controls • hydraulic systems • food industry • process control systems Environmental Specifications • position effect: < 0.1% of zero offset shift • vibration effect: no change at 10 g (RMS), Electrical Interface excitation - (black) signal - (white) BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 Tel.: +32-3-238 6469 website: www.bcmsensor.com B-2900 Schoten - Antwerpen, BELGIUM Fax: +32-3-238 4171 email: sales@b

カタログの1ページ目を開く

Inner-Cavity Pressure Sensors Technical Data General conditions for measurements: media temp. = 25°C ±1°C, ambient temp. = 25°C ±1°C, humidity = 50%RH ±10%RH, barometric pressure: 86-106 kPa, vibration = 0.1 g (1m/s/s) max. Notes: 1. The pressure medium should be compatible with wetted parts material and pressure diaphragm. 2. For customized pressure ranges, consult BCM. 3. "fs" refers to full scale pressure or rated pressure. 6. Calculated as a rate of output change between 25°C and 70°C, and normalized by the output at 25°C, when the sensor 7. Response time for a 0 bar to fs step change,...

カタログの2ページ目を開く

Model 664F(a) Inner-Cavity Pressure Sensors Ordering Information ordering code: 664F(a)-250-II-G1/4-(*) 16 = 0~16 bar 25 = 0~25 bar 40 = 0~40 bar 60 = 0~60 bar 100 = 0~100 bar pressure ranges 160 = 0~160 bar G 250 = 0~250 bar G 400 = 0~400 bar G customized range G available as an option G accuracy I = 0.05%fs II = 0.1%fs III = 0.25%fs (standard) IV = 0.5%fs process connection G1/2 (standard) M20x1.5 other thread types available as options, consult BCM customized parameter “(*)” is necessary only if any customized parameter is required, otherwise it is neglectable. Examples of Ordering Code...

カタログの3ページ目を開く

Model 664F(a) 1 / 3ページ

カタログの抜粋

BCM SENSOR TECHNOLOGIES bvのすべてのカタログと技術パンフレット

Model 664F(a)
1 / 3ページ