Model 330B
1 / 3ページ

お気に入りに追加する　

{{requestButtons}}

カタログの抜粋

Mono-Block Stainless Steel Pressure Sensors SEIZOR The 330B is a mono-block pressure sensor made from 304 stainless steel via BCM thick-film technology. Thanks to the mono-block structure, there is no O-ring needed as seal inside the sensor body and no leakage can happen at the back of the sensor. By means of thick film technology, the resistor network including the Wheatstone bridge circuit and the compensation circuit is directly printed at the back of the 304 stainless steel pressure diaphragm. The other side of the diaphragm is exposed to measured media without For specific request, the sensor can be equipped with signal conditioning circuit to have amplified output • rugged mono-block structure • either with or without temperature compensation • impact and vibration resistance • easy mounting liquid level control • process control systems • hydraulic controls • biomedical instrumentation Environmental Specifications position effect: < 0.1% of zero offset shift vibration effect: no change at 10 g (RMS), BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 Tel.: +32-3-238 6469 website: www.bcmsensor.com B-2900 Schoten - Antwerpen, BELGIUM Fax: +32-3-238 4171 email: sales@bcmsensor.co

カタログの1ページ目を開く

Mono-Block Stainless Steel Pressure Sensors Technical Data General conditions for measurements: media temp. = 25°C ±1°C, ambient temp. = 25°C ±1°C, humidity = 50%RH ±10%RH, barometric pressure: 86-106 kPa, vibration = 0.1 g (1m/s/s) max. Notes: 1. The pressure medium should be compatible with wetted parts material and pressure diaphragm. 2. For customized pressure ranges, consult BCM. 3. "fs" refers to full scale pressure or rated pressure. 4. Options for the output signal: 0.5~4.5Vdc ratiometric, 4~20mA, l2C, SPI. 6. Calculated as a rate of output change between 25°C and 70°C, and...

カタログの2ページ目を開く

Mono-Block Stainless Steel Pressure Sensors Ordering Information pos. 2: pressure ranges and references SP: solder pads (standard for mV output) FW: flying wires, PVC, 100mm (standard for 0.5/4.5V, 4/20mA, "(*)" is necessary only if any customized parameter is required, otherwise it is neglectable. Examples of Ordering Code • standard sensor: • customized sensor: BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 Tel.: +32-3-238 6469 website: www.bcmsensor.com B-2900 Schoten - Antwerpen, BELGIUM Fax: +32-3-238 4171 email: sales@bcmsensor.com

カタログの3ページ目を開く

BCM SENSOR TECHNOLOGIES bvのすべてのカタログと技術パンフレット

1. 

   EPS200-series

   3 ページ

2. 

   model 328s

   2 ページ

3. 

   664F(C)

   3 ページ

4. 

   101B(A19F)

   4 ページ

5. 

   101B(A12.6H)

   4 ページ

6. 

   101B(a19L)

   4 ページ

7. 

   Model 101B (a19D)

   3 ページ

8. 

   Model 1915/1995 Static Torque Transducers

   3 ページ

9. 

   Model 1966/1996

   3 ページ

10. 

    Model 1811

    3 ページ

11. 

    Model JB04 load cell junction Boxes

    1 ページ

12. 

    WD 21 Weighing indicator

    1 ページ

13. 

    153T

    3 ページ

14. 

    670F

    3 ページ

15. 

    725F

    4 ページ

16. 

    FD101

    3 ページ

17. 

    119B

    3 ページ

18. 

    1915/1995 Static Torque Transducers

    3 ページ

19. 

    1811 Non-Contact Rotary Torque Transducers

    3 ページ

20. 

    UG Force Transducers With Overload Protection

    4 ページ

21. 

    2911 Tensile & Compression Force Transducers

    3 ページ

22. 

    156K/159K Miniature Single Bending Beam Force Transducers

    3 ページ

23. 

    159A Miniature Single Bending Beam Force Transducers

    3 ページ

24. 

    1416 Rocker Pin Compression Load Cells

    3 ページ

25. 

    1312/1392 Shear-Web Compression And Tension Load Cells

    3 ページ

26. 

    1211/1291 Cylindrical Compression Load Cells

    3 ページ

27. 

    LV39 Liquid Level Transducers And Transmitters With Overvoltage Protection

    3 ページ

28. 

    LV36 Submersible Liquid Level Transmitters With Flush Diaphragm

    3 ページ

29. 

    LV16 Mini-Diameter Submersible Liquid Level Transducers

    3 ページ

30. 

    315T Smart Differential Pressure Transmitters

    2 ページ

31. 

    219D Differential Pressure Transmitters For Smart Valve Application

    3 ページ

32. 

    131C Inner Cavity Pressure Transmitters For General Purpose

    5 ページ

33. 

    105C Pressure Transmitters For Automotive Industry And Refrigerator

    3 ページ

34. 

    Model 1531

    3 ページ

35. 

    Model 2 9 6 5

    3 ページ

36. 

    M o d e l 1 9 1 6 / 1 9 9 6

    3 ページ

37. 

    Model 1815

    2 ページ

38. 

    Model 181 1

    3 ページ

39. 

    Model A3

    2 ページ

40. 

    Model A2

    2 ページ

41. 

    Model A1 Sensor Signal Conditioner

    2 ページ

42. 

    Model T3000

    5 ページ

43. 

    model 3911/3991

    3 ページ

44. 

    Model 1664 Single Point Load Cells

    3 ページ

45. 

    Model 1661

    3 ページ

46. 

    Model 1660

    3 ページ

47. 

    Semiconductor Strain Gauges

    5 ページ

48. 

    Diaphragm Strain Gauges for Pressure Sensors and Force T ransducers

    12 ページ

49. 

    Linear Strain Gauges for Bending Beam Force T ransducers

    7 ページ

50. 

    Model TFS2100

    3 ページ

51. 

    Model TFS2200

    3 ページ

52. 

    Model TFS2000

    3 ページ

53. 

    Model L V66(a)/L V66(b)

    4 ページ

54. 

    Model L V38

    2 ページ

55. 

    Model L V39

    3 ページ

56. 

    Model L V37

    1 ページ

57. 

    Model L V36

    3 ページ

58. 

    Model L V35

    1 ページ

59. 

    Model L V16

    3 ページ

60. 

    Model 101B(f)

    6 ページ

61. 

    Model 101B(a15G)

    4 ページ

62. 

    Model 101B(a13H)

    4 ページ

63. 

    Model 101B(a12.6L)

    4 ページ

64. 

    Model 664F(b)

    3 ページ

65. 

    Model 664F(a)

    3 ページ

66. 

    Model 301B

    4 ページ

67. 

    Model 500G

    4 ページ

68. 

    Model SE106

    3 ページ

69. 

    Model SE105

    3 ページ

70. 

    Model SE103

    4 ページ

71. 

    Model SE102

    4 ページ

72. 

    Model SE101

    3 ページ

73. 

    BCM Load Cells

    2 ページ

74. 

    BCM Sensor Dies, OEM Pressure Sensors, OEM Differential Pressure Sensors & Transducers

    2 ページ

75. 

    BCM Pressure and Liquid Level Transducers and Transmitters

    2 ページ

76. 

    BCM Strain Gauges for Transducer Application and Stress Analysis

    2 ページ