101B(A19F)
1 / 4ページ

カタログの抜粋

Model 101B(a19F) Pressure Sensors with Flush-Diaphragm Description The 101B(a19F) pressure sensor with a complete flush diaphragm is developed from the 101B(a19G) pressure sensor. This model is specially designed for the applications in which the medium is thick and requires cleaning process. The 101B(a19F) is based on BCM’s piezoresistive sensor die. The sensor die is packaged in a stainless steel housing. Oil filled in the housing is isolated from measured media by a stainless steel diaphragm. The pressure types of the sensor include gauge (relative) and absolute. For gauge pressure type, vacuum pressure measurement is available as an option. The output of 101B(a19F) can be configured to 10%~90%Vs ratiometric, 4~20mA, I2C, or SPI by integrated the electronics. The 101B(a19F) is temperature compensated over -10°C ~+70°C as standard. Features • complete flush diaphragm • pressure types & ranges: gauge: -1, 0.1, ..., 35 bar absolute: 0.7, ..., 400 bar sealed gauge: 600, 1000 bar • rugged, isolated stainless steel package • either with or without temperature compensation • outstanding sensitivity and reliability • excited by either current or voltage Applications • process control systems • industrial controls • pneumatic and hydraulic controls • pressure transducers and transmitters • pressure calibrators Environmental Specifications • position effect: < 0.1% of zero offset shift in any direction • vibration effect: no change at 10 g (RMS), 20~2000 Hz • shock: 100 g, for 10 millisecond Industriepark Zone 4, Brechtsebaan 2 B-2900 Schoten - Antwerpen, BELGIUM website: www.bcmsensor.com email: sales@bcmsensor.com

カタログの1ページ目を開く

SENSOR Technical Data Parameters General conditions for measurements: media temp. = 25°C ±1°C, ambient temp. = 25°C ±1°C, humidity = 50%RH ±5%RH, barometric pressure: 860~1060 mbar, max. vibration = 0.1 g (i.e. 0.98m/s/s). Notes: 1. For customized pressure ranges, consult BCM. 2. “fs” refers to full scale pressure. 3. Measured at fs, i.e. full scale pressure. 5. Accuracy = sqrt (non-linearity + hysteresis + repeatability ). 6. Calculated as the maximum change of output signal over the compensated temperature range. 7. Response time for a 0 bar to fs step change, 10% to 90% rise time....

カタログの2ページ目を開く

Model 101B(a19F) Pressure Sensors with Flush-Diaphragm Circuit Diagram excitation+ Electrical interface 4-colored flying wires (4F) wire color red black yellow blue connection excitation + excitation signal + signal - connection excitation + signal + excitation (1) N.C. signal - (1) N.C.: Not connected. (2) All dimensions are in mm. (3) In case of alterations, refer to the label on the package. BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 website: www.bcmsensor.com B-2900 Schoten - Antwerpen, BELGIUM email: sales@bcmsensor.com

カタログの3ページ目を開く

SENSOR Ordering Informationposition (pos.) 1: model 101B(a19F) pos. 2: pressure ranges and references (-1/0)bar G 0.1bar G 0.2bar G 0.35bar G 0.7bar G, A G: gauge pressure A: absolute pressure S: sealed gauge standard: 40mV for range of 0.1bar; 60mV for other ranges options: 10%/90%Vs(ratiometric) I2C SPI pos. 5: compensation T1 = -10 ~ +70°C, 0 ~ 50°C in case of 0.1bar range 4F = 4 colored flying silicone rubber wires (standard) 5P = 5 gold-plated copper pins If the required output signal is not mV, the electrical interface will be adjusted as the way confirmed on request. Examples of...

カタログの4ページ目を開く

101B(A19F) 1 / 4ページ

カタログの抜粋

BCM SENSOR TECHNOLOGIES bvのすべてのカタログと技術パンフレット

101B(A19F)
1 / 4ページ