
グループ: RITTER Germany
カタログの抜粋

The M4 product family consist of smart communication devices designed to provide flexible data communications solutions for industrial environments. The M4 products are all software upgradable. All the hardware in the M4 product family are equipped with a mobile modem with a flexible footprint. Therefore all the hardware can be shipped with a communication technologies that is best suited for the desired use case. Current supported mobile network technologies are: • 2G GPRS • 3G UMTS (with 2G GPRS fallback) • 4G LTE cat 1 (with 2G GPRS fallback) • 4G LTE cat M1 (with 2G GPRS fallback) More...
カタログの4ページ目を開く
The IB hardware is equipped with an Ethernet interface and a mobile modem. It has has galvanically isolated RS-232 and RS-485 interfaces. The hardware is built into a wall mountable and sealable housing with a separate terminal cover. 2.1.1 IB_GSM_M4 The IB_GSM_M4 software transforms the IB hardware in a multifunctional router with different working modes: 1. TCP server mode: The device will listen on a preconfigured port for incoming connections. Once connected, the device will provide transparent communications between the serial (RS232/RS485) interface and the network socket. 2. TCP...
カタログの5ページ目を開く
Reading of an electricity meter (DLMS/COSEM) from a remote location Reading the log output of a device from a remote location Router ... 2.1.2 IB_RTU_M4 The IB_RTU_M4 software transforms the IB hardware into a remote terminal unit (RTU). The RTU will act as a protocol converter between a SCADA protocol and modbus (modbus RTU and/or modbus TCP). The following SCADA protocols are supported. • • The TCP communications with the SCADA system can be secured with TLS (Transport layer Security). For this software solution the IB hardware needs to be equipped with additiona
カタログの6ページ目を開く
The AB hardware is equipped with an Ethernet interface and a mobile modem. It has 1 active digital input and 1 digital output. 2.2.1 AB_GSM_M4 The AB_GSM_M4 software transforms the AB hardware in a multifunctional router with different working modes: 1. TCP server mode: The device will listen on a preconfigured port for incoming connections. Once connected, the device will provide transparent communications between the serial (RS232/RS485) interface and the network socket. 2. TCP client mode: The device will repeatedly try to connect to preconfigured server. Once connected, the device will...
カタログの7ページ目を開く
Reading of an electricity meter (DLMS/COSEM) from a remote location Reading the log output of a device from a remote location Route
カタログの8ページ目を開く
The DB hardware has a power supply that comes with a supercap back-up, in order to ensure the required energy for communications, even after a power surge. It is equipped with an Ethernet interface and a mobile modem. The DB hardware is built into a DIN rail mountable housing. It has 8 active digital inputs, 2 digital outputs and 2 analogue inputs. 2.3.1 DB_RTU_M4 The DB_RTU_M4 software transforms the DB hardware into a remote terminal unit (RTU). The RTU will act as a protocol converter between a SCADA protocol and modbus (modbus RTU and/or modbus TCP). The following SCADA protocols are...
カタログの9ページ目を開くBausch Datacomのすべてのカタログと技術パンフレット
-
InduBox GSM M4
2 ページ
-
DinBox PSTN 485 SIA
2 ページ
-
DinBox RTU SL
2 ページ
-
Delta Logger
2 ページ
-
DinBox GSM SL
2 ページ
-
DinBox GSM M4
2 ページ
-
DinBox 3G Router
2 ページ
-
IBGSMIX_5_Eng
2 ページ
-
IBGSMM4_New
2 ページ
-
DB4GRouter_New
2 ページ
-
Datasheet DINBox_M36
2 ページ
-
DBRTUM36
2 ページ
-
PULSARGPRSDS
2 ページ
-
V56PCI2DS_V1.0_Eng
1 ページ
-
V56PC2RDS_Eng_V1.0
2 ページ
-
MA-DF560
77 ページ
-
IMODGSM -E3
2 ページ
-
DinBox M36
2 ページ
-
DinBox RTU (DB RTU)
2 ページ
-
Indubox GSM (IB GSM)
2 ページ
-
ILICODM
4 ページ
-
SM_H2 SOCKET MODEM
2 ページ
-
SM_H2
2 ページ
-
Delta D32E25
1 ページ
-
Proxima GSM Rack
2 ページ
-
Proxima Rack
2 ページ
-
PDUALR
1 ページ
-
P33FU
2 ページ
-
P56SIA
2 ページ
-
P56FUDS
2 ページ
-
Vega 56 PC2 modem
2 ページ
-
SMD2415V3
2 ページ
-
InduBox PSTN
2 ページ
-
V56PC2R
2 ページ
-
PS2CD
4 ページ
-
DB PSTN
2 ページ