Multi-turn gearbox GHT 360.1
1 / 4ページ

{{requestButtons}}

カタログの抜粋

Multi-turn gearbox GHT 360.1 - 1

Multi-turn gearboxes for motor operation of gate valves and globe valves GHT 360.1 Torques up to 80,000 Nm Information

カタログの1ページ目を開く
Multi-turn gearbox GHT 360.1 - 2

Multi-turn gearboxes Where a large fluid flow has to pass through a pipeline under high pressure, an actuator with high output torque is necessary to operate the required high pressure gate valve. An example would be in a large power plant where large quantities of vapour at a pressure of 250 bar or more are transported from the boiler to the turbines or within the feedwater supply of the steam generating boiler. With the SA 07.1 – SA 48.1 multi-turn actuators, AUMA covers a torque range of up to 32,000 Nm. Torques up to 80,000 Nm can be achieved by combining an AUMA multi-turn actuator...

カタログの2ページ目を開く
Multi-turn gearbox GHT 360.1 - 3

RR [5] [6a] [4] [1] LL [6b] [2] [3] 2010-09-06 [1] Housing In the basic version, the housing is produced from high quality spheroidal cast iron to be able to withstand the high loads during the entire operation. [2] Valve attachment ■ ■ The valve attachment consists of: the mounting flange for mounting the gearbox to the valve and the output drive for transmitting torque to the valve stem. The following output drives are available: ■ B2 (standard) This output drive is integrated into the hollow shaft of the gearbox. The torque is transmitted via a parallel key. ■ A or AF Stem nut for...

カタログの3ページ目を開く
Multi-turn gearbox GHT 360.1 - 4

[1] Multi-turn actuators SA 07.2 – SA 16.2/SA 25.1 – SA 48.1 Torques from 10 to 32,000 Nm Output speeds from 4 to 180 rpm [2] Multi-turn actuators SA/SAR with controls AUMATIC Torques from 10 to 1,000 Nm Output speeds from 4 to 180 rpm [3] Linear actuators SA/LE Combination of multi-turn actuator SA with linear thrust unit LE Thrusts from 4 kN to 217 kN Strokes up to 500 mm Linear speeds from 20 to 360 mm/min [4] Part-turn actuators SG 05.1 – SG 12.1 Torques from 100 to 1,200 Nm Operating times for 90° from 4 to 180 s [5] Part-turn actuators SA/GS Combination of multi-turn actuator SA with...

カタログの4ページ目を開く

AUMAのすべてのカタログと技術パンフレット

  1. ELECTRIC ACTUATORS

    6 ページ

  2. Multi-turn actuators

    92 ページ

  3. SAEx 07.2

    1 ページ

  4. Service Worldwide

    8 ページ

  5. AUMA Support App

    4 ページ

  6. electric actuators

    56 ページ

  7. Service world wide

    12 ページ

カタログアーカイブ

  1. Test bench PV 1405

    24 ページ