カタログ >
ATLAS Copco Compressors USA >
Atlas Copco Railway compressors

Atlas Copco Railway compressors
1 / 12ページ

カタログの抜粋

Atlas Copco Railway compressors Air supply systems for rail-bound vehicles 0.5 - 70 l/s oil lubricated and oil-free compressors and air treatment equipment DESIGNED TO PERFORM, BUILT TO LAST

カタログの1ページ目を開く

Atlas Copco puts yo in providing a reliable source of Designed to perform and built to last For railway applications, Atlas Copco can offer several compressor technologies, covering capacities between 0,5 and 70 l/s at a pressure of 10 bar(e). The GAR series relies on the company’s patented asymmetric screw profile and consists of a full range of robust oil-injected rotary screw compressors. The SFR and LFR series incorporate small and medium-sized compressor models that utilise the patented oil free orbiting scroll and oilfree piston principles respectively. The LXFR series includes low...

カタログの2ページ目を開く

ou on the right track high quality, dry compressed air. The outstanding GAR design allows the units to be installed inside or suspended underneath a locomotive or railway carriage. Since our compressors are also quiet in operation and almost vibration- free, they are also suitable for installation on vehicles used for passenger transport such as EMU’s, DMU’s, metro cars and trams. The SFR Scroll range offers you the ultimate in low noise oil free, low maintenance compressor technology. Reducing your life cycle costs is our care Atlas Copco is able to provide you with components that are all...

カタログの3ページ目を開く

GAR air supply units - Advanced rota robust simplicity for extreme Proven components for high reliability The standard modules include: - the patented Atlas Copco rotary screw compressor element, - intake valve offering the advantage of containing almost no moving parts, (GAR 5-30), - a gearbox; (where applicable) transmitting via an elastic coupling the power of the drive motor to both compressor element and cooling air fan, - an air/oil separator removes the oil from the outlet compressed air in three stages, - aluminium block combi air/oil cooler, designed for optimal heat transfer, low...

カタログの4ページ目を開く

145 145 145 145 145 145 145 145 145 145 145 145 145 145 145 145 145 145 145 Rotary screw technology Maximum working pressure bar(e) psig 50 Hz GAR 5 GAR 7 GAR 10 GAR 11 GAR 14 GAR 15 GAR 18 GAR 22 GAR 30 60 Hz GAR 5 GAR 7 GAR 10 GAR 11 GAR 14 GAR 15 GAR 18 GAR 22 GAR 30 GAR 37 Compressor type Capacity FAD at 9.5 barg l/s cfm * Unit performance measured according to ISO 1217, Ed 3, Annex C-1996 test code. Reference conditions: - absolute inlet pressure 1 bar (14.5 psi) - intake air temperature 20 °C (68 °F) Other pressure/motor speed variants are available on request. 10 10 10 10 10 10 10 10...

カタログの5ページ目を開く

Unique SFR oil-free scroll compressors for a safe, environment-friendlier air supply. A revolutionary technique, requiring minimum maintenance and providing you with a secure and clean compressed air source The orbiting scroll process generates pulsation free air, and, since there is no metal to metal contact within the system, there is no need for lubrication in the compression chamber. In this way, an absolutely oil-free compressed air delivery is assured. Consequently, maintenance requirements are minimal; since no oil/ air filtration system is involved, only the air filter on the...

カタログの6ページ目を開く

SFR compressors: safe in operation and quality air on top The compression technology incorporated in the SFR units is the scroll principle. Air compression is achieved by the interaction of a fixed and an orbiting helical scroll. Air at atmospheric pressure enters the compression chamber at the exterior side of the scroll element. Once air is drawn in, the orbiting scroll seals off the inlet port. As the scroll continues to orbit, the air is progressively compressed into an increasingly smaller chamber. A continuous flow of compressed air leaves the scroll element through a discharge port...

カタログの7ページ目を開く

Atlas Copco’s oil-free LFR/ LXFR compressors are products of innovative design and constructed with the highest quality of materials. This unique single or two stage, oil-free reciprocating compressor range has a maximum working pressure of 10 bar(e) for continuous duty application between 0.3 and 14.4 l/s (7 bar(e)) and are particularly used in tram and light rail vehicle applications. Atlas Copco's unique single or two stage, oil-free reciprocating compressors Atlas Copco utilises a high proportion of standardised, quality components to ensure extended life for oil-free compressors under...

カタログの8ページ目を開く

Oil-free, compact and virtually maintenance-free Maximum working pressure bar(e) psig LFR 2 M 150 LFR 3 M 150 LFR 6 M 150 LFR 9 M 150 LFR 14 M 150 LFR 3 M 180 LFR 4 M 180 LFR 7 M 180 LFR 11 M 180 LFR 17 M 180 Compressor type Capacity FAD * l/s cfm Installed motor size kW hp Weight (approx.) * Unit performance measured according to ISO 1217, Ed 3, Annex C-1996 test code. Reference conditions: - absolute inlet pressure 1 bar (14.5 psi) - intake air temperature 20 °C (68 °F) FAD is measured at 8 bar(e) working pressure. Other pressure/motor speed variants are available on request. 10 10 10 10...

カタログの9ページ目を開く

In any compressed air system, the major problem encountered is with malfunction of pneumatic components and corrosion of pipework, which is attributable to the presence of oil/water condensate; a natural phenomena in any oil injected compression process. The result is reduced reliability of pneumatic systems, increased maintenance downtime and associated cost. The solution is to incorporate Atlas Copco compressed air/dryer/filter packages within the GAR compressor unit; this quality air package will reduce the pressure dew point of the air down to 20 °C below the lowest ambient temperature...

カタログの10ページ目を開く

When you buy compressed air equipment from Atlas Copco, you won't just receive equipment. You also get the full backing of a company that's in the forefront of the compressed air business. Our dedication to you, our customer, is a continuing commitment. We put as much care into service support as we do into the development, design, manufacturing and testing of our products. This support is available to you, wherever you operate, through our global network of sales companies and distributors. We can advise you on which compressor, and which options, best suit you specific requirements. We...

カタログの11ページ目を開く