カタログ >
ASM Automation Sensorik Messtechnik GmbH >
WS42C

WS42C
1 / 8ページ

カタログの抜粋

posiwire® Cable Extension Position Sensors WS42C Displacement sensor with measurement length up to 1,000 mm With precision potentiometer Product versions Analog ou

カタログの1ページ目を開く

WS42C - Cable Extension Position Sensor Version with analog output Specifications Order options Measurement range Analog: quasi infinite Potentiometer 1 kΩ Voltage 0.5 ... 10 V Current 4 ... 20 mA, 2 wire ±0.35% f.s., other values on request Mounting brackets Spacer nuts Sensing device Precision potentiometer POM measuring cable: stainless steel Protection class Cable output, standard length 2 m Connector M8, 4-pin (only for output R1K) Temperature range Pull-out force

カタログの2ページ目を開く

posiwire® WS42C Dimensions Measurement range 750 … 1000 mm, R1K, 10V5, 420A, mounting brackets Measurement range 3.3 Dimensions in mm [inch] Dimensions informative only. For guaranteed dimensions consult factory.

カタログの3ページ目を開く

posiwire® WS42C Measurement range 750 … 1000 mm, R1K, 10V5, 420A, spacer nuts Measurement range 3.3 Dimensions in mm [inch] Dimensions informative only. For guaranteed dimensions consult factory.

カタログの4ページ目を開く

posiwire® WS42C Output specifications Analog outputs Voltage divider R1K Excitation voltage Potentiometer impedance Thermal coefficient Depends on the measuring range, individual sensitivity of the sensor is specified on the label Voltage divider utilization range Operating temperature Refer to output specification The potentiometer must be connected as a voltage divider! The following processing circuit has to be implemented according to the circuit scheme in the Appendix (see „Output information“)! Electrical current flow impact on the wiper causes linearity errors and shortens the...

カタログの5ページ目を開く

Excitation voltage Voltage output Excitation current Output voltage Output current Output load Stability (temperature) Reverse polarity, short circuit Output noise Operating temperature Refer to output specification Output signals Cable color Excitation voltage 18 ... 27 V DC non stabilized, measured at the sensor terminals Excitation current Output current Stability (temperature) Reversed polarity, short circuit Output noise Operating temperature Refer to output specification Output signals Cable color Signal wiring 420A Current output (2 wire) Signal wiring

カタログの6ページ目を開く

posiwire® WS42C Accessories Connector cable M8, 4 pin (angular coupling) shielded The 4-lead shielded cable is supplied with a mating 4-pin 90° M8 connector at one end and 4 wires at the other end. Available lengths are 2 m, 5 m and 10 m. Wire cross sectional area 0.14 mm² Order code KAB - xM – M8/4F/W - LITZE IP69: KAB - xM – M8/4F/W/69K - LITZE xM = length in m Connector cable M8, 4 pin (straight coupling) shielded The 4-lead shielded cable is supplied with a mating 4-pin M8 connector at one end and 4 wires at the other end. Available lengths are 2 m, 5 m and 10 m. Wire cross sectional...

カタログの7ページ目を開く