カタログ >
ASM Automation Sensorik Messtechnik GmbH >
PRDS3

PRDS3
1 / 16ページ

カタログの抜粋

Magnetic Angle Encoders PRDS3 Magnetic Angle Encoder with incremental output Datasheet

Copyright  ASM Automation Sensorik Messtechnik GmbH Am Bleichbach 18-24 85452 Moosinning Germany The information presented in this data sheet does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by ASM for any consequence of its use. Publication thereof does not convey nor imply any license under patent or industrial or intellectual property rights. Applications that are described herein for any of these products are for illustrative purpose only. ASM makes no representation or warranty...

カタログの2ページ目を開く

Incremental output Sensor features • Incremental output Magnetic measurement principle With 10 mm shaft or 6 mm hollow shaft Housing: Aluminium Specifications Output Incremental encoder output RS422-/HTL compatible, filtered output Measurement range Resolution (pulses per revolution) Protection class IP67/IP69 (connector output with IP67/IP69 connector cable) IP67 (cable output) Housing material Clamps, mounting plate 5-pin connector M12 Cable, standard length 2 m Temperature range Life cycle of bearings Revolutions per minute (mech.) Allowable shaft load 250 g approx. (without cable)

カタログの4ページ目を開く

= Shaft 10 mm = Hollow shaft 6 mm 2 Resolution (pulses per revolution) 256 / 1024 = RS422 compatible output with excitation 5 V DC, filtered output = RS422 compatible output with excitation 10 ... 36 V, filtered output = HTL compatible output with excitation 18 ... 36 V, filtered output = 8-pin connector M12, axial = 8-pin connector M12, radial = Cable, standard length 2 m Accessories: Connector cable (see page 15) Mounting plates (see page 8)

カタログの5ページ目を開く

Dimensions Version with hollow shaft A – Marking B – Connector M12 C – 4x M3 – 5 [.197] deep screw hole orientation to marking not defined! Dimensions in mm [inch]. Weight approx. 250 g. Dimensions informative only. For guaranteed dimensions consult factory.

カタログの6ページ目を開く

Version with shaft A – Marking B – Connector M12 C – 4x M3 – 5 [.197] deep screw hole orientation to marking not defined! D - Mounting clamps PRPT-BFS1 E - Flat Dimensions in mm [inch]. Weight approx. 250 g. Dimensions informative only. For guaranteed dimensions consult factory.

カタログの7ページ目を開く

Mounting plates Mounting possibilities PRAS2/PRDS2 and PRAS3/PRDS3 PRPT-BPL1 + PRPT-BFS1 (Mounting plates for screw mounting + mounting clamp) PRPT-BPL2 + PRPT-BFS1 (Mounting plates for welding assembly + mounting clamp) PRPT-BPL1 + PRPT-BFS2 (Mounting plates for screw mounting + mounting bracket) PRPT-BPL2 + PRPT-BFS2 (Mounting plates for welding assembly + mounting bracket)

カタログの8ページ目を開く

PRPT-BPL1 (Screw mounting) In combination with the mounting clamps PRPT-BFS1 (3 x M2.5) or in combination with the mounting bracket PRPT-BFS2 (3 x M4). Dimensions in mm [inch]. Weight 30 g approx. Dimensions informative only. For guaranteed dimensions please consult factory. PRPT-BPL2 (Welding assembly) In combination with the mounting clamps PRPT-BFS1 (3 x M2.5) or in combination with the mounting bracket PRPT-BFS2 (3 x M4). Dimensions in mm [inch]. Weight 30 g approx. Dimensions informative only. For guaranteed dimensions please consult factory.

カタログの9ページ目を開く

In combination with PRAS3/PRDS3 and frontal mounting. Dimensions in mm [inch]. Weight 30 g approx. Dimensions informative only. For guaranteed dimensions please consult factory.

カタログの10ページ目を開く

Excitation voltage RS5V(F): 5 V DC ±10 % RS24V(F): 10 ... 36 V DC 100 mA max., depending on the load <500 kHz ̅ ̅ ̅ A, A, B, B, Z, Z Push-Pull 10 mA max. ±50 x 10-6 / °C f.s. (typical) -40 ... +85 °C Short circuit DIN EN 61326-1:2013 Excitation current Pulse frequency Output signals Output current Stability (temperature) Operating temperature Protection EMC Output signals Excitation + Excitation GND Signal A Signal A Signal B Signal B Signal Z (ref. puls) Signal Z Unfiltered output RS5V / RS24V A preferred maximum pulse frequency has to be defined within the product code. This will take...

カタログの11ページ目を開く

POSIROT® PRDS3 Signal wiring Signal Cable color View to the sensor connector

カタログの12ページ目を開く

Excitation voltage Excitation current Pulse frequency Output signals Output current Stability (temperature) Operating temperature Protection EMC 100 mA max., depending on the load <500 kHz ̅ ̅ ̅ A, A, B, B, Z, Z Push-Pull 10 mA max. ±50 x 10-6 / °C f.s. (typical) -40 ... +85 °C Short circuit DIN EN 61326-1:2013 Output signals Excitation+ Excitation GND Signal A Signal A Signal B Signal B Signal Z (ref. puls) Signal Z Unfiltered output HT24V A preferred maximum pulse frequency has to be defined within the product code. This will take account for limited bandwidth of downstream counter....

カタログの13ページ目を開く

Signal wiring Output signals Cable color View to the sensor connector

カタログの14ページ目を開く

Accessories Connector cable M12, 8 pin (angular coupling) shielded connector The 8-lead shielded cable is supplied with a mating 8-pin 90° M12 connector at one end and 8 wires at the other end. Available lengths are 2 m, 5 m and 10 m. Wire: cross sectional area 0.25 mm² Cable diameter: 6.3 ±0.2 mm Order code KAB - xM - M12/8F/W - LITZE IP69: KAB - xM - M12/8F/W/69K - LITZE xM = length in m Connector cable M12, 8 pin (straight coupling) The 8-lead shielded cable is supplied with a mating 8-pin M12 connector at one end and 8 wires at the other end. Available lengths are 2 m, 5 m and 10 m....

カタログの15ページ目を開く

Deutsch connector Sensors with cable output can be delivered with Deutsch connector. Protection class: Connection: Wire cross sectional area: Standard cable length: Protective cable tube: IP67 (while plugged) 3, 4, 6, 8 poles – depending on output, see table below 0.5 mm2 2m for a better mechanical protection the cable can be delivered with a protective tube Deutsch connector – table Number of poles

カタログの16ページ目を開く