カタログ >
ASM Automation Sensorik Messtechnik GmbH >
PRAS26

PRAS26
1 / 13ページ

カタログの抜粋

posirot® Magnetic Angle Sensors PRAS26 Angle sensor for indoor applications Contactless with external position magnet, wear-free Product versions Analo

カタログの1ページ目を開く

PRAS26 - Magnetic Angle Sensor Version with analog output Specifications Order options Measurement range Voltage 0.5 ... 10 V Voltage 0.5 ... 4.5 V ratiometric Current 4 ... 20 mA, 3 wire Signal characteristics Signal increasing CW, clockwise Signal increasing CCW, counterclockwise Rated distance sensor / magnet Depending on the position magnet Housing material Epoxy glass fibre, thermoplastic Protection class 3-pin connector, Tyco Electronics, type "SlimSeal" Temperature range 8 g approx. (without cable) Order example: PRAS26 – 360 – U6 – CW – TE3 Accessories: Connector cables (see page...

カタログの2ページ目を開く

A – Position magnet B – Measuring area C – Marking Dimensions in mm [inch]. Weight without cable approx. 8 g. Dimensions informative only. For guaranteed dimensions consult factory.

カタログの3ページ目を開く

Order code zinc coated steel, plastic A misalignment of the position magnet has an effect on the linearity. Dimensions in mm [inch]. Dimensions informative only. For guaranteed dimensions please consult factory.

カタログの4ページ目を開く

Order code zinc coated steel; plastic A misalignment of the position magnet has an effect on the linearity. Dimensions in mm [inch] Dimensions informative only. For guaranteed dimensions please consult factory.

カタログの5ページ目を開く

Order code zinc coated steel, plastic A misalignment of the position magnet has an effect on the linearity. Dimensions in mm [inch]. Dimensions informative only For guaranteed dimensions please consult factory.

カタログの6ページ目を開く

A – Sensor B – Marking C – Thread M10 Order code A misalignment of the position magnet has an effect on the linearity. Dimensions in mm [inch]. Dimensions informative only. For guaranteed dimensions please consult factory.

カタログの7ページ目を開く

Measuring error by misalignment of the position magnet Air gap (a) Parallelism (b) Axial misalignment (c) Error by axial misalignment [°] Position magnet

カタログの8ページ目を開く

Output specification Analog output U2B Voltage output 0.5 ... 10 V Excitation current Output voltage Output current Measuring rate Stability (temperature) Reverse polarity, short circuit Operating temperature Excitation voltage Excitation current Output voltage Output current Measuring rate Stability (temperature) Reverse polarity, short circuit Operating temperature U6 Voltage output 10 … 90 % ratiometric Excitation voltage

カタログの9ページ目を開く

I1B Current output 4 … 20 mA, 3 wires Excitation voltage Excitation current Output current Measuring rate Stability (temperature) Reverse polarity, short circuit Operating temperature PRAS26 – connector TE3 Signal wiring Connector TE3 Excitation + View to sensor connector Mating connector: Tyco Electronics, SlimSeal, Part-Nr. 2106135-3, 3-pin

カタログの10ページ目を開く

PRAS26 – connector 3-pin with connecting leads This cable is supplied with a male 3-pin connector at one end and 3 wires at the other end. Cross section 0.32 mm2. Wire length 0.5 m. Order code Signal wiring 3-pin connector Connector pin no. / connecting leads 1

カタログの11ページ目を開く

Characteristics for magnetic angle sensors Output signal CW (clockwise increasing) Output signal CCW (counterclockwise increasing) Example angular range 90° Example angular range 360° A – Marking B – Measurement range [°]

カタログの12ページ目を開く

Accessories PRAS26 Magnetic shield An optional shield plate is available for the angle sensor PRAS26. It can reduce the effect of residual magnetizing in case the sensor has to be mounted on a ferromagnetic material. Order code magnetic shield: PRAS20/26-MSHIELD

カタログの13ページ目を開く