カタログ >
Arthur Grillo GmbH >
O2T - flue gas tester for O2

O2T - flue gas tester for O2
1 / 1ページ

カタログの抜粋

Arthiir Grillo measuring & controlling systems Measurement accuracy - O2 measurement: Measuring accuracy - Temperature: Measuring accuracy of the transmitter: Operating Mode: □ Oxygen measurement directly in the flue gas □ Outputssignale for O2-content and flue gas temperature The flue gas analyser O2T is a transducer for measuring the oxygen content and temperature of the flue gas. The transmitter operates with a zirconia probe for O2 determination and with a measuring resistor Pt100 for temperature measurement. It is installed directly into the flue gas duct. A gas treatment is not required. ACCURACY/ERROR LIMIT: ± 5% of reading ± 2.2 °C for 100 °C <t <400 °C ± 0.5% of final value TECHNICAL SPECIFICATIONS: Measurement mode Measuring probe O2 measurement O2 measurement: Measuring ranges: Exit: Burden: Response time: Operational readiness: Exhaust temperature: Permissible fuels: Tool life: Testing option: Foreign-heated zirconium dioxide probe 0 ... 5% O2 0..10% O2 0 ... 20% O2 0 ... 20 mA or 4 ... 20 mA Max. 500 Q <15 s for 90% measured value change Approx. 2 min. After switching on the supply voltage Max. 400 ° C, continuous Residue-free gases and light fuel oil > 1 year Test gas connection on electronics housing Temperature measurement 80—^Measuring element - Temperature: Measuring ranges: Exit: Burden: Measuring instrument: Casing: Protection class Cable gland Dimensions Weight Pt100 according to DIN EN 60751 0 ... 250 °C or 0 ... 400 °C 0 ... 20 mA or 4 ... 20 mA Max. 500 Q PHYSICAL: Stainless steel pipe, 0 60 mm, 250 mm long with flow pipe 180 mm long Aluminum die-cast for receiving the heating transformer as well as the evaluation electronics. Housing screwed directly to the measuring armature, thermally insulated IP 65 according to EN 60529 PG11 120 x 122 x 80 Approx. 6 kg Power supply: Power consumption: CONFORMITY: EN 61000-6-2, EN 61000-6-3, CE-mark according RoHS-directive 2011/65/EU Flue gas analyser O2T For continuous O2-measurement and temperature measurement Weld-nozzle 60 0 x 4 mm of mild steel; weld-nozzle stainless steel on request Measurement range & signal output: Customer-specific presetting required! Reserve measuring probe Arthur Grillo GmbH • Am Sandbach 7 • 40878 Ratingen • phone 0 21 02 - 47 10 22 • fax 0 21 02 - 47 58 82 www.grillo-messgeraete.de/en • Email: info@grillo-messgeraete.de • web shop: www.sensor-store.de

カタログの1ページ目を開く