カタログ >
Arconic >
Simmonds Nylstop P Series

Simmonds Nylstop P Series
1 / 2ページ

カタログの抜粋

Nylstop Series The Original Nylon Locking Nut The Nylstop nut is designed to stop nut and bolt disengagement during use. The internal nylon ring deforms around the threads as the nut is twisted on to the bolt, ensuring a tight, vibration resistant grip on the bolt. Benefits Vibration resistant – The deformation of the nylon ring holds the fastener in place even under extreme vibration Corrosion resistance – The standard product is Zinc Nickel plated achieving a minimum 720 hours on salt spray test Re-usability – Can be fastened and unfastened a minimum of 15 times without compromising minimum required performance (ISO 2320) Consistency - The Nylstop nuts permits a complete automation of installation because of constant quality and very low scatter of the locking torque. This allows installation without concerns of defective or non-conforming nuts and reduces the cost of monitoring and tight inspection. Chemical resistance – The nylon 6.6 polyamide used is completely insensitive to a myriad of acids, solvents and oil based liquids Temperature resistance – Operating temperature range between -40oC and 140oC (peak condition) Popular applications: Diameters: Materials: Standard Coating: Any industrial application M2.5 – M52 Steel CL8 & CL10, Stainless Steel A2 & A4 Zinc Nickel Available in 2 different height varieties (P-Normal, T-Low) Also available: CN/CF 70 Self locking, high quality, one piece, bearing nut All the benefits of the standard Nylstop nut, with the additional benefit over a typical bearing nut of one piece installation speed. No need for costly and time-consuming extra parts, reducing installation time.

カタログの1ページ目を開く

Nylstop Self Locking Nut - Type P NYLON All dimensions are in mm unless stated. Class 8 Steel Stainless Steel Standard Protections Pitch Diam Part Number (replace ** with material code) Steel - ZnNi 720 hours salt spray test Material Code Please consult us for other materials, specials, treatments Code 10 steel class 10 Code 52 stainless steel A2 The nuts indicated with a black dot are standard manufactured Code 54 stainless steel A4 Alcoa Fastening Systems St Cosme Operations, 9 rue de Cressonnieres 72110 Saint Cosme en Varais, France Tel: +33 (0) 2.43.31.41.00 Fax: +33 (0) 2.43.31.41.41...

カタログの2ページ目を開く