PBQ-900L
1 / 2ページ

カタログの抜粋

PBQ-900L Qseven® R2.0 carrier board in EPIC Form Factor Qseven® Carrier Board Dual Gigabit Ethernet Ports Dual Channels 24-bit LVDS Wide Range Operating Temp.: -40 ~ 85°C Mechanical & Environmental Power Requirement Serial Port 4 x COM Ports(3 x RS-232 ports,1 x RS232/422/485 selectable port) 1 x UART port Power Consumption Operating Temp. Operating Humidity 2 x USB 3.0 Super Speed ports depending on CPU module 1 x SMBus port 1 x I2C port 1 x NGFF (M.2) socket for Skt1-E for wireless 1 x SATA connector 1 x NGFF (M.2) socket for Skt1-M to support SATA depending on SSD module 1 x Intel® i210IT PCIe GbE controller 1 x GbE by Qseven™ CPU Module 8-bit Programmable Digital Input/Output Realtek ALC662 HD Audio CODEC,MIC/Line out Display Graphic Interface 1 x DVI connector LCD: 1 x Dual Channels 24-bit LVDS connector OS Support Depends on CPU Module All specifications are subject to change without notice

カタログの1ページ目を開く

Block Diagram PBQ-900L Q7 R2.0 165 x 115mm EPIC FF Carrier board DC-IN PWR1 Wide Range DC Input 10 ~ 30V Input 10~30V Dual Channel 24-bit LVDS Analog RGB (reserved pins from EmQ-i230Q only) DDI DVI-I connector PCIe x1 (Lane 0), SATA 0 PCIe x1 (Lane 1), USB 2.0 (Port 0) Stacked USB 3.0 Type A connector USB Super Speed (Port 0, 1 from EmQ-i2200) SMBus I/F (Data/ Clock / GND) Qseven® R2.0 carrier board in EPIC Form Factor Optional Accessories Cable Kit 1 x USB cable 2 x COM cables 1 x SATA cable 1 x SATA power cable 1 x AUDIO cable

カタログの2ページ目を開く