PAII series
1 / 20ページ

PLANETARY GEARBOX

Planetary Gearboxes New P series - PSII/ PEII/ PAH/ PGII PAII Series High efficiency Reduced backlash Optimized Inertia moment Limited temperature rise Long service life Flexible mounting diameters Minimized size and weight Your motor's perfect match!! The brand new APEX PHseries. The Pn series is an economic high precision planetary gearbox with excellent performance and quality. Our innovative PHseries design features minimal size, lightweight and high efficiency. Ordering Code Ordering Example : PAH 090-010 / SIEMENS 1FT6 041-4AF71 (1) Other ratios are available, please contact APEX. (2)...

Permitted Radial And Axial Loads On Output Shaft The permitted radial and axial loads on output shaft of the gearbox depend on the design of the gearbox supporting bearings. If radial force F2r is not exerted on the center of the output shaft X<1/2xl_ or X>1/2xl_, the permitted radial and axial loads can be calculated by the position load factor Kb on the above diagram. Permitted radial load F2r on center of output shaft X=1/2 x L for various output speeds. Values provided are for 20,000 hours'*' life. 'For Continuous Operational), the service life reduced to 50%.

Planetary Gearboxes New P series - PSII/ PEII/ PAH/ PGII PAII Series Specifications (2) Other ratios are available, please contact APEX. (3) Backlash is measured at 2% of Nominal Output Torque T2N. (4) Applied to the output shaft centerat 100 rpm. (5) 0 = Input shaft diameter. (6) These values are measured at 3000 rpm without load. (7) For continuous operation, the service life is 10000 hrs. (8) These values are measured with ratio=10 ( 1-stage) and ratio=100 ( 2-stage) at 3000 rpm.

PAII Series Dimension Shaft Detail (1) This dimension refers to motor shaft diameter. (2) The maximum motor shaft length. For other Motor specific dimensions, please contact APEX. (3) Input dimensions vary according to motorflange. (4) Please contact APEX, if there is no proper dimension. (5) 0= Input shaft diameter.

Planetary Gearboxes New P series - PSII/ PEII/ PAH/ PGII PAII Series Specifications (2) Other ratios are available, please contact APEX. (3) Backlash is measured at 2% of Nominal Output Torque T2N. (4) Applied to the output shaft centerat 100 rpm. (5) 0 = Input shaft diameter. (6) These values are measured at 3000 rpm without load. (7) For continuous operation, the service life is 10000 hrs. (8) These values are measured with ratio=10 ( 1-stage) and ratio=100 ( 2-stage) at 3000 rpm.

PAII Series Dimension (1) This dimension refers to motor shaft diameter. (2) The maximum motor shaft length. For other Motor specific dimensions, please contact APEX. (3) Input dimensions vary according to motorflange. (4) Please contact APEX, if there is no proper dimension. (5) 0= Input shaft diameter. Shaft Detail

Planetary Gearboxes New P series - PSII/ PEII/ PAH/ PGII PAII Series Specifications (2) Other ratios are available, please contact APEX. (3) Backlash is measured at 2% of Nominal Output Torque T2N. (4) Applied to the output shaft centerat 100 rpm. (5) 0 = Input shaft diameter. (6) These values are measured at 3000 rpm without load. (7) For continuous operation, the service life is 10000 hrs. (8) These values are measured with ratio=10 ( 1-stage) and ratio=100 ( 2-stage) at 3000 rpm.

(1) This dimension refers to motor shaft diameter. (2) The maximum motor shaft length. For other Motor specific dimensions, please contact APEX. (3) Input dimensions vary according to motorflange. (4) Please contact APEX, if there is no proper dimension. (5) 0= Input shaft diameter. Shaft Detail

Planetary Gearboxes New P series - PSII/ PEII/ PAH/ PGII PAII Series Specifications (2) Other ratios are available, please contact APEX. (3) Backlash is measured at 2% of Nominal Output Torque T2N. (4) Applied to the output shaft centerat 100 rpm. (5) 0 = Input shaft diameter. (6) These values are measured at 3000 rpm without load. (7) For continuous operation, the service life is 10000 hrs. (8) These values are measured with ratio=10 (1-stage) and ratio=100 ( 2-stage) at 3000 rpm.

PAII Series Dimension Shaft Detail (1) This dimension refers to motor shaft diameter. (2) The maximum motor shaft length. For other Motor specific dimensions, please contact APEX. (3) Input dimensions vary according to motorflange. (4) Please contact APEX, if there is no proper dimension. (5) 0= Input shaft diameter.

Planetary Gearboxes New P series - PSII/ PEII/ PAH/ PGII Shaft Detail (1) This dimension refers to motorshaft diameter. (2) The maximum motor shaft length. For other Motor specific dimensions, please contact APEX. (3) Input dimensions vary according to motorflange. (4) Please contact APEX, if there is no properdimension. (5) 0= Input shaft diameter.

PAII Series Dimension Shaft Detail (1) This dimension refers to motor shaft diameter. (2) The maximum motor shaft length. For other Motor specific dimensions, please contact APEX. (3) Input dimensions vary according to motorflange. (4) Please contact APEX, if there is no proper dimension. (5) 0= Input shaft diameter.

Planetary Gearboxes New P series - PSII/ PEII/ PAH/ PGII PAII Series Specifications (2) Other ratios are available, please contact APEX. (3) Backlash is measured at 2% of Nominal Output Torque T2N. (4) Applied to the output shaft centerat 100 rpm. (5) 0 = Input shaft diameter. (6) These values are measured at 3000 rpm without load. (7) For continuous operation, the service life is 10000 hrs. (8) These values are measured with ratio=10 ( 1-stage) and ratio=100 ( 2-stage) at 3000 rpm.

Shaft Detail (1) This dimension refers to motor shaft diameter. (2) The maximum motor shaft length. For other Motor specific dimensions, please contact APEX. (3) Input dimensions vary according to motorflange. (4) Please contact APEX, if there is no proper dimension. (5) 0= Input shaft diameter.

Planetary Gearboxes New P series - PSII/ PEII/ PAH/ PGII Shaft Detail (1) This dimension refers to motorshaft diameter. (2) The maximum motor shaft length. For other Motor specific dimensions, please contact APEX. (3) Input dimensions vary according to motorflange. (4) Please contact APEX, if there is no properdimension. (5) 0= Input shaft diameter.