LoadSensor StarterKit
1 / 3ページ

カタログの抜粋

Pewatron LoadSensor StarterKit LoadSensor StarterKit 1 Description Pewatron is launching its newly developed sensor technology for integrated load and weight measurement. In contrast to standard load cells or solutions using strain gauges, no additional mounting is necessary as a result of the concept and the customised design. The two rigid plates at either end of the elastic dielectric form the mounting or the contact surface for the load or weight measurement. Because the geometry of the sensor can be chosen as needed or specified by the customer, the sensor can be integrated directly into the end product. This dispenses with the need for constructing a mounting, as well as the associated material and assembly costs. The capacitive measurement principle in pressure and load sensor technology has actually been known for many years but, despite its many advantages, has only been used in niche areas, primarily due to high costs. Most sensors use a Wheatstone bridge as a basis or have a resistive design. Due to the rapid advancement in electronics for capacitive systems, driven by touch screen development, this has now changed. Capacitive systems are no longer intrinsically expensive and they also offer the advantages of high resolution and low power consumption. Pewatron is now offering customised capacitive load and weight sensors with the aforementioned advantages at an attractive price. For initial tests, and to allow customers to get to know the new sensor technology, Pewatron has developed a starter kit. A sensor area of 170 mm x 170 mm, the integrated electronic evaluation unit and a USB connector are included in the kit, along with the software for visualising and recording the measurement values. Use the capacitive load sensor technology from Pewatron to implement fully integrated sensor technology tailored to your product. Measuring range 1000N, approx. 100kg Accuracy ± 5% Span Resolution ±1% Span Long term drift (10 hours) 0.3% Applied Load Supply Voltage +5VDC via USB port Output signal: digital , USB 3 Revision History Sensor Revision A- 30.03.2020 Initial Revision Sensor Revision B- 0209.2020 Released - Rev. 1.3 Draft, not released - Rev.1.4 4 Dimensions and shape Parameter Thickness Dimensions/ Shape Dimensions/ Shape Condition Max value; Mated, max. value Sensor panel, max. value Measurement Area Weight Cable Measurement area, max. value Sensor Panel Sensor Electronic board

カタログの1ページ目を開く

Pewatron LoadSensor StarterKit 5 Operating conditions Supply voltage 5.0VDC, Ambient temperature 25°C (unless otherwise specified) Parameter Condition Operating Temperature and humidity Operating altitude Storage temperature and humidity Safe overload limit Ultimate overload limit Supply Voltage no condensation max value no condensation not causing permanent offset not damaging the device Supplied via USB port, min 500mA Unit °C %RH m.a.s.l. °C Span Span VDC 6 Characteristics Supply voltage 5.0VDC, Ambient temperature 25°C (unless otherwise specified) Parameter Condition Measurement Range...

カタログの2ページ目を開く

We are here for you. Addresses and Contacts. Headquarter Switzerland: Office Germany: Angst+Pfister Sensors and Power AG Angst+Pfister Sensors and Power Deutschland GmbH Scan here and get an overview of personal contacts! for sensors and power solutions

カタログの3ページ目を開く