カタログ >
Angst+Pfister Sensors and Power AG >
HPSD 4000 Pressure Transducer 1/7

HPSD 4000 Pressure Transducer 1/7
1 / 8ページ

カタログの抜粋

General description Pressure transducer HPSD 4000 is an OEM pressure sensing device. Signal conditioning consist of complete temperature compensation and adjusted amplifier in single, programmable ASIC. High performance and accuracy enables use of this transducer in many applications. Programmable temperature compensation provides 1% total error over 0 to 70°C temperature range. Standard ratiometric 0,5 to 4,5 V and I2C digital output at the same time give OEM users maximum freedom for any type of application with dry air or non-corrosive gases and liquids. The whole group consists for pressure ranges from 10 mbar to 7 bar. Differential and absolute versions are available for this transducer group. Features • Single 5 V supply voltage • Easy to use package • Wide compensated range (0 to 70°C) • Total accuracy down to 1% over 0 to 70°C, all effects included (maximum) • Standard 0,5 to 4,5 V voltage output • Up to 15 bits I2C output (pressure + temperature) • High performance OEM applications • Differential and absolute pressure configurations • Pressure ranges: from 10 mbar to 7 bar Competitive sensor & power supply solutions worldwide HVAC Medical instrumentation Respirators Air flow monitoring Process control Leak detection Altimeters

カタログの1ページ目を開く

HPSD 4000 Pressure Transducer Pressure range ID group range Pressure types HPSD 4000-010M HPSD 4000-020M 10 mbar 20 mbar differential/gage differential/gage Types overview (0,15 psi) (0,3 psi) bidirectional bidirectional differential differential ID group HPSD 4000-010M HPSD 4000-020M 0,5 to 4,5 V 0,5 to 4,5 V TVOUT 25°C = Pressure types differential/gage differential/gage AMB Operating: -25 = 5 V unless otherwise noted.to 85°C VTemperature bidirectional bidirectional cc ranges Compensated: 0 to 70°C differential differential Storage to 4,5to 125°C VOUT 0,5 : -40 V 0,5 to 4,5 V 1) Over...

カタログの2ページ目を開く

ID group Pressure types 100-31-331-005-EH-0213.pdf VOUT Temperature ranges 1) Over pressure 2) Burst pressure HPSD 4000-010M HPSD 4000-020M differential/ differential/ bidirectional bidirectional differential differential 0,5 to 4,5 V 0,5 to 4,5 V Operating: -25 to 85°C Compensated: 0 to 70°C Storage : -40 to 125°C 100 mbar 200 mbar 150 mbar 300 mbar HPSD 4000-050M differential/ bidirectional differential 0,5 to 4,5 V Pressure 350 mbar 1 bar 2 bar range Datasheet (5 psi) (15 psi) (30 psi) ID group Pressure types differential/ bidirectional differential differential/ bidirectional...

カタログの3ページ目を開く

HPSD 4000 Pressure Transducer Over pressure is the maximum pressure which may be applied without causing damage to the sensing element. Burst pressure is the maximum pressure which may be applied without causing leakage damage to the sensing element. Analog output signal is ratiometric to power supply Vcc, digital signal is not ratiometric to the power supply. Offset voltage is the voltage output at zero pressure. Full scale output is the voltage output at full pressure range. Full scale span is the algebraic difference between the output at full scale pressure range and offset. Digital...

カタログの4ページ目を開く

STOP condition (P): is generated in transition of SDA line from LOW(H) to HIGH(L) when SCL line (clock) is HIGH. It can be only generated by the master. Each data request needs to end with STOP condition. DATA valid (D): Data is transmitted in byes (8 bits) starting with pressure data (2 bytes) with the MSB (most significant bit) first and followed by 2 bytes of temperature data with MSB first. Each data bit is transferred with each clock pulse. Valid data are presented after start condition when data line is stable during HIGH clock is generated. SDA changes must be done while clock is...

カタログの5ページ目を開く

C Pin 5 must be left unconnected Competitive sensor & power supply solutions worldwide

カタログの6ページ目を開く

Ordering guide Transducer type Other configurations possible on special request. Competitive sensor & power supply solutions worldwide Pressure type Pressure direction Pressure port

カタログの7ページ目を開く

PEWATRON SENSORS ■ POWER SUPPLIES We are here for you. Addresses and Contacts. Postcode 1000 - 2999 Eric Letsch Pewatron AG Thurgauerstrasse 66 CH-8052 Zurich Phone + 41 44 877 35 14 Mobile + 41 76 491 66 70 eric.letsch@pewatron.com Sales International Key Accounts Sales Austria Sales Other Countries / Product Pressure Sensors Gas sensors / Gas sensor modules Load cells Thomas Clausen Phone + 41 44 877 35 13 thomas.clausen@pewatron.com Linear position sensors Angle sensors Eric Letsch Phone + 41 44 877 35 14 eric.letsch@pewatron.com Power supplies Sebastiano Leggio Phone + 41 44 877 35...

カタログの8ページ目を開く