カタログ >
Angst+Pfister Sensors and Power AG >
89-series miniature and robust pressure transducer

89-series miniature and robust pressure transducer
1 / 8ページ

カタログの抜粋

89-series miniature and robust pressure transducer - 1

Model 89 FEATURES ü Robust SS housing ü Compact Board Mount ü Oil-filled SS Isolated ü Custom Configurable ü Analog or Digital Output DESCRIPTION The Series 89 is a miniature and robust pressure transducer with calibrated and temperature compensated output . It incorporates MEMS sensing chip which is oil-filled and SS isolated. The sensor is configured with excellent media compatibility in its class of board-mount. Multi-order compensation for correction of offset, sensitivity, thermal errors and nonlinearity are accomplished in factory via an internal DSP running a correction algorithm with calibration coefficients stored in on-chip EEPROM. A variety of output configuration, including resolution, sampling rate, output interface are available to provide simple and readyto-use solution for a wide rage of application. Multiple chosen for pneumatic interface are suitable for system integration. Multiple choice for gas or fluid interface are available upon reques

カタログの1ページ目を開く

89-series miniature and robust pressure transducer - 2

Temp - Operating 1 Temp - Compensated 2 Temp - Storage Long-term Stability 5 Orientation Sensitivity 1. -40 to 85 ℃ is available upon request. 2. Custom temperature compensation is available upon request. 3. Gas only, no condensation. 4. Range dependent. Refer to individual data sheet. 5. Zero stability to be tested with 120 hour hot storage at 85 ℃ , which is roughly equivalent to accelerated aging of the part for over a year at Room Temperature. 6. Measured orientation effect on the zero output of 0.15 psi sensor with a standard deviation of 0.035% Full-Scale/g. 7.The maximum deviation in...

カタログの2ページ目を開く

89-series miniature and robust pressure transducer - 3

Ordering Information Series 89 9 8 P0 Configuration P0: Standard PX: Refer to individual data sheet Type of Output A = Analog Output D = Digital Output Type of Pressure Supply Blank = 5.0 V L = 3.3 V *Absolute is available only for pressure equal or greater than 1000 mbar/15 psi. mbar 1000 102 2000 202 4000 402 7000 702 Notes: Custom ranges and units are available upon request. Please contact factory. Port Type 2 = Barb 9 = Other Notes: Custom interface is available upon request. Please contact factory.

カタログの3ページ目を開く

89-series miniature and robust pressure transducer - 4

Specifications – Analog Output Parameters Overall Error 6 Update Rate 1. 3.3V or 5.0V supply should be ordered separately. Other supply voltage from 2.75 to 5.5V is available upon request. With external JFET, supply voltage from 5 to 48V can be applied providing a special configuration should be ordered. 2. Continuously running measurement sequence is executed. 3. Higher resolution longer step response settling time. Dithering is available upon request and can be switched on or off. 4. VDD-ratiometric voltage. For vented gauge pressure, zero is 10%. Absolute voltage output (0/1V, 0/5V) is...

カタログの4ページ目を開く

89-series miniature and robust pressure transducer - 5

Specifications – Digital Output Parameters Operating Current Stand-by Current 3 Resolution - ADC Input High Level 10 1. 3.3V or 5.0V supply should be ordered separately. Other supply voltage from 2.75 to 5.5V is available upon request. With external JFET, supply voltage from 5 to 48V can be applied providing a special configuration should be ordered. 2. 5V supply and analog output referenced. Current consumption are varied according to supply, response rate and resolution chosen. Normally sensing element is not always excited. Mean current consumption for one complete measurement cycle...

カタログの5ページ目を開く

89-series miniature and robust pressure transducer - 6

Dimension - Barb fitting (5.7) 6.6 XXXX 89XX XXXX XXXX Marking Information

カタログの6ページ目を開く

89-series miniature and robust pressure transducer - 7

Foot Print

カタログの7ページ目を開く

89-series miniature and robust pressure transducer - 8

We are here for you. Addresses and Contacts. Headquarter Switzerland: Office Germany: Angst+Pfister Sensors and Power AG Angst+Pfister Sensors and Power Deutschland GmbH Scan here and get an overview of personal contacts! for sensors and power solutions

カタログの8ページ目を開く