Windjammer pro
1 / 6ページ

DYNAMIC FLUID SOLUTIONS MOTOR COOLING EXHAUST STATUS COUTPUT CONTROL \ CONN POWER CONN SEE NOTES 5 & 6~y MOTOR cooling! INLET 1 ► Greater efficiency and flow ► More robust design ► Common performance - 120 to 240 VAC ► Most configurable blower on the market ► Runs cooler, cleaner and longer ► Improved software flexibility

Key Features ► Higher performance design with “Common Performance” model provides 17% greater flow compared to other manufacturers ► “Common Performance” provides the same air performance between 120 VAC and 240 VAC ► New design reduces overall noise and improves sound quality ► Innovative cooling chamber provides lower operating temperature prolonging overall life ► Improved flexibility for speed control, data logging, and programmability The innovative design and enhancements of the Windjammer® PRO provide INCREASED PERFORMANCE over competitive models. One key feature is the ability to...

Configuring Your Blower Please examine and check off the following steps to help you determine your requirements at a glance. Contact your local AMETEK sales representative for a list of standard configurations. Other variations may require additional lead time. Motor Cooling Style Motor Cooling Exhaust o Dual Tubes Motor Cooling Exhaust Tube Motor Cooling Exhaust Working Intake Working Exhaust Motor Cooling Inlet Working air is separated from the motor cooling air. This is great for environments with contamination, high heat, moisture, etc. Motor Cooling Exhaust Motor Cooling Inlet Tube...

Pressure Performance□ 1 Stage □ 2 Stage□ 3 Stage □ 4 Stage Speed Command PWM 15 - 45 vdc max amplitude 30 Hz - 20 kHz frequency range Generally, more pressure on the “sealed” side of the curve reduces the maximum flow on the “open” side of the curve. Always refer to individual datasheet for actual performance data. When operating on the left side of the chart (low flow) an increase in the number of stages can give you substantially more pressure. Speed command options allow the blower speed to be controlled via a configurable input signal. If the 0-10 vdc option is selected an input...

CompeƟtor Efficiency FLOW (CFM) Windjammer PRO Performance Windjammer PRO Efficiency CompeƟtor Performance CompeƟtor Efficiency Clean System Impedance Dirty System Impedance Notes: Data presented represents blower performance at STANDARD AIR DENSITY, .075 l b/ f t 3 (29.92" Hg, Sea Level, 68°F). Vacuum performance available upon request. Technical Data Sound Level @ Full Speed: 82dB (A) and 55 Sones Operating Temperature (Working Air): -4oF to 122oF (-20oC to 50oC) Approximate Weight: 6.5 Lbs (2.95 Kg) Standard Options Custom Options The proven reliability of the AMETEK Windjammer ® makes the PRO...

Construction B = Bypass T = Thru-flow P = Peripheral S = Slotted shell (dual purpose) Inlet/Outlet Size S = Standard Flow H = High flow U = Ultra high flow Fan System 1 = Single stage 2 = 2 Stage 3 = 3 Stage 4 = 4 Stage X = Non standard Voltage 0 = Dual voltage 120/240 1 = 110/120 2 = 230/240 Performance Level F = Good N = Better (standard) H = Best Mounting Holes A = (3X) 5/16" thru (standard) B = (3x) 1/4-20 C = (3X) M6 Working Air Intake, Motor Cooling Intake - Discharge A = Bell-mouth, intake slots - discharge slots B = Inlet tube, intake slots - discharge slots C = Bell-mouth, intake...