TechPress 2?
1 / 4ページ

Product Brochure TechPress 2™ Mounting Press Prepare Up To 2 Mounts in 7 Minutes Touch-Pad Switches Control All Functions Programmable Up To 50 Mounting Menus Easy to Change Mold Assemblies: 25 mm - 2"

TechPress 2™ Mounting Press TechPress 2™ Mounting Press The TECHPRESS 2™ hydraulic-pneumatic automatic mounting press is used to encapsulate samples for metallographic preparation. The microprocessor based system allows up to 50 mounting steps to be programmed, including cycle start/stop, preheating time and temperature, heating time and temperature, predefined mold pressures or manual pressure control and cooling time. Temperature is displayed in both Fahrenheit and Celsius throughout the mounting procedure. Two mounts can be produced at one time using the duplexing spacer. Depending on...

Compression Mounting Compression mounting is an economical method of encapsulating samples that can withstand the pressure and heat of the mounting process. A variety of mounting powders and preforms are available for this application. Phenolic Powders & Preforms Black, green and red phenolics are used for routine applications when color-coding for material identification, or as backfill for more expensive mounting powders. Orange phenolic offers excellent chemical resistance and provides better photographic contrast and edge retention. Preforms require no measuring, are cleaner than loose...

Equipment is subject to change due to innovations/improvements at any time. Document No: D30-10XXPBV1.0 Allied Equipment and Fixtures are Designed and Manufactured by Allied in the United States • 2376 East Pacifica Place, Rancho Dominguez, California 90220 USA • • (800) 675-1118 (US/Canada) • (310) 635-2466 (worldwide) • www.alliedhightech.com •