Disaster warning systems - Emergency signalling
1 / 8ページ

Plaquette DISASTER 3/01/07 12:06 Page 2 High output siren Outdoor warning siren Control unit Power supply

Omni directional warning sirens > ref. Siralet CS) Siralert CS: a unique range of high output warning sirens. This wide range of omni directional sirens has been specially designed for outdoor use in case of emergency • Omni directional sound level of 106 to over 125 dB at a distance of 30 m (higher sound levels available on request) • Siralert sirens are electronically designed: it is possible to emit the National Civil Defence Warning Signal and/or other customised sounds and messages, and to broadcast live messages as a public address system • Thanks to its highly sophisticated...

Omni directional warning sirens > ref. Siralet CS ) 3 POSSIBLE HORN CONFIGURATIONS • Omni directional back-to-back • Directional side-by-side • Directional one above the other (this configuration allows the directional acoustic result to be optimized. Whether or not it is possible depends on the height of the pole). AE&T can deliver more powerful sirens than those in the table hereunder. The system is modular: (Note: Attachment poles have to be made specifically according to the location and the siren) CONTROL MODES Possibility for control by dry-contact relays, RS 232, RS 485 or by radio...

The Tl 30 is a new high output electronic siren assembled in clusters or installed individually. It is ideal for very noisy sound environments. • Very high sound output: up to • Sound or voice applications • Choice of 64 sounds + silence + public address. Contains most international Alert Sounds grammed freely by the user • Excellent power/size ratio bus, compatible with MODBUS (8 sounds can by triggered by wire control, compatible with AE&T Tonalarm and electronic sounders) Vigisignal network • 0 dB symmetric input, 600 Ohms for Public address system • Automatic sound test every 24 hours...

Power supply for high output sirens The Siralim is a new power supply for high output electronic sirens such as 7130. Specially designed for these sirens, the Siralim may be integrated into a Vigisignal type global alert network or may be used to supply power to one or more individual sirens. • Power supply specially adap- ted to electronic power sirens • The Siralim possesses a sound generator used for perfect synchronisation when several sirens are supplied in parallel • Auxiliary outputs for trigge- ring a sounder or strobe light • Battery charge monitoring • Fault monitoring...

Self-powered multi-function control unit The Alarm Pilot AP3 is a new control panel used to trigger sirens, voice message emitters or "ASC" (UPS) safety power supply. With its integrated, backed-up 12 VDC power supply, the Alarm Pilot AP3 is a simple and efficient control system. It is also one of the appliances that can be connected to the Vigisignal bus. • Possibility of controlling a Voxalert emitter, an ASC safety power supply, or a Siralert siren • Possibility of having several AP3 units to control one or several sirens. In this case, the AP3s can be connected together by an RS 485...

Vigisignal alert network The Vigisignal alert network connects the Ti 30 and Marianne sirens, the Siralim power supply and the AP3 control box using a simple twisted pair wiring. Vigisignal offers a global alert solution with the network used to control up to 60 appliances and to circulate numerous items of information (triggering of messages, alarm statuses, fault transfers, etc.) APPLICATION 1 : simple alert network APPLICATION 2: complex alert network Call point VIGISIGNAL NETWORK power supply Siralim power supply AP3 control Tonalarm sirens Call point Omnidirectional Siren Siralim power...

•— Emergency signalling Disaster warning —• •— Speech and tone devices Public address systems —• •— General alarms 4 impasse Joliot-Curie - BP 25 - 641 10 Jurançon - France