カタログ >
A. u. K. Müller >
Servo-direct stepper motor controlled valve, DN 10

Servo-direct stepper motor controlled valve, DN 10
1 / 2ページ

カタログの抜粋

Servo-direct stepper motor controlled valve, DN 10 - 1

Product Information Servo-direct stepper motor controlled valve, DN 10 Characteristics Servo-direct controlled valve Stepper motor, medium separated by PTFE bellows Long term performance capability Medium temperature up to 80°C continuous opertion No water hammer High operating safety by usage of high quality material and 100% final testing Applications Thermostatically controlled heating system Instant flash heater Hot and cold vending machines Industrial equipment Air conditioning Agriculture equipment Cleaning equipment Temperature equalizers Dishwashers Washing machines Water treatment equipment Description The 2/2 way servo-direct motorized valve has a 10mm orifice, but a continuously variable stroke to accurately control the flow through the valve. It can function with low inlet pressures and flow rates, similar in nature to a direct acting valve without a complete shut off function. The stepper motor drive part of the valve is completely separated from the medium by means of special PTFE bellows. This valve has been specifically developed for applications that require continuous adjustment of the flow rate. For example the flow through an instant flash heater can easily be regulated for maximum accuracy and efficiency. typical performance curve Alternatively, by incorporating the motorized valve in thermostatically controlled heating systems, the flow rate into the system can be controlled according to ambient temperature in the e room. © copyright A.u.K. Müller, technical changes reserved

カタログの1ページ目を開く

Servo-direct stepper motor controlled valve, DN 10 - 2

Product Information Servo-direct stepper motor controlled valve, DN 10 Technical Data type 2/2-way single chamber straight valve, servo-, direct controlled continuously adjustable stroke fitting position any, preferably actor upwards potable water and physically and chemically similar media l/min (completely open) actuator type stepper motor unipolar steps (open - closed) nominal voltage stepper motorized valve duty cycle Nominal power Protection Type Motor connection leads 6 x 0,222 / AWG 24 (AWM Style 1007) 1) Fixing possibility for self tapping screw Ø 4,2 2) Fixing groove plug...

カタログの2ページ目を開く