カタログ >
4B Braime Components >
Milli-Temp Bearing / Surface Temperature Sensor

Milli-Temp Bearing / Surface Temperature Sensor
1 / 3ページ

カタログの抜粋

Milli-Temp Bearing / Surface Temperature Sensor - 1

Product Datasheet BRAIME COMPONENTS Milli-Temp Sensor Adjustable Depth Bearing & Surface Temperature Sensor: 4-20 mA Output Approved for explosive atmospheres: ATEX and IECEx Zones 20, 21 & 22 for dust APPLICATION For use on any application where bearing or surface temperature monitoring is desired or required. METHOD OF OPERATION The Milli-Temp is a loop powered analogue sensor with a 4-20 mA linear output that is scaled across a temperature range for continuous temperature monitoring. The sensor has been designed to allow the depth of the probe to be adjustable depending on your application. The sensor screws directly into a bearing housing through the existing grease zerk thread. Each sensor is fitted with a zerk to allow lubrication of the bearing without the need for removal of the sensor. For surface mount applications, a lug style adaptor bolts directly onto a bearing housing, motor, gearbox, or machine casing. The mounting hole is 9.5mm from the factory, but can be drilled up to 12.5mm if needed. The sensor is supplied with a 3m cable. The connections are not polarity sensitive therefore special connection requirements are eliminated, and the cable can be extended in the field. FEATURES ► 4-20 mA Output ► Screw in Positive Mount Installation (Bearing Temp.) ► Grease Zerk for Bearing Lubrication (Bearing Temp.) ► Lug Style Adaptor (Surface Temp.) ► 304 Stainless Steel Body PART NUMBERS/ACCESSORIES ► ADBxxV3AI/D2 Milli-Temp: 50mm ► ADBxxV3AI/D3 Milli-Temp: 75mm ► ADBxxV3AI/D4 Milli-Temp: 100mm ► ADBxxV3AI/D6 Milli-Temp: 150mm ► ADBxxV3AI/D8 Milli-Temp: 200mm ► KIT-LUG-MIL Lug Style Adaptor (ADB2MV3AI only) ► ADBT4 ADB Sensor Tester ADB Sensor Tester During planned maintenance or periodic testing, the ADB sensor tester can be used as a diagnostic tool to verify the alarm and shutdown sequences of the control unit are functioning as expected. Probe Wrench (Included with Sensor) Lug Style Adaptor for Surface Mounting (Sold Separately) *Longer probe lengths available on request Detailed specification, wiring diagrams and installation/operating instructions available upon request. Please refer to instruction manual for correct installation. Information subject to change or corr

カタログの1ページ目を開く

Milli-Temp Bearing / Surface Temperature Sensor - 2

Product Datasheet BRAIME COMPONENTS TECHNICAL SPECIFICATIONS Model Power supply: Reverse Polarity Protection: Temperature Accuracy: Typical ± 0.6°C, Over Entire Range ± 2.7°C Default Temperature Resolution: Operating Temperature (Probe): Output Resolution (Typical): Body / Probe Material: Fixing Thread: Cable: Certificates and approvals: 3m – 2 Conductor Ex II 1D ta IIIC T200125°C Da IP66 Ex ta IIIC T200125°C Da IP66 Wiring Diagram Milli-Temp Linear Output Scale Detailed specification, wiring diagrams and installation/operating instructions available upon request. Please refer to...

カタログの2ページ目を開く

Milli-Temp Bearing / Surface Temperature Sensor - 3

Product Datasheet BRAIME COMPONENTS DIMENSIONS / INSTALLATION Outer Race (Green Area) Lug Mount on Bearing Housing Installation on Pillow Block Bearing (Bearing Temperature Application) Bearing Sensor on Belt Conveyor Detailed specification, wiring diagrams and installation/operating instructions available upon request. Please refer to instruction manual for correct installation. Information subject to change or correction.

カタログの3ページ目を開く