カタログ >
4B Braime Components >
4B VIBMIL vibration sensor

4B VIBMIL vibration sensor
1 / 2ページ

カタログの抜粋

Product Datasheet PRODUCT DATASHEET VIBMIL VIBMIL Vibration Sensor APPLICATION VIBMIL is a vibration sensor designed for continuous monitoring of vibration levels in industrial environments. It is current loop powered accelerometer and delivers accurate vibration RMS velocity using a 420 mA output. Built with a stainless-steel enclosure, including a 3/4” NPT thread for conduit connection. The VIBMIL can be supplied with optional inbuilt NTC or PT100 temperature sensors. The VIBMIL is equipped with female 1/4”-28 UNF female mounting thread, allowing the use of a screw, stud, or mounting stud to secure the sensor to the desired application. The sensor is supplied with a 1/4”-28 UNF set screw as standard. Optional converters to M8 and M6 male threads are available. To achieve maximum sensitivity, mount the sensor vertically along the Y-axis of the machinery. To ensure accurate readings and proper functioning of the VIBMIL, securely fix it to a level surface during installation. Implement the 2 wire, loop powered accelerometer into the desired control system and measure the linear output from 4 – 20mA proportional to the sensors measuring range. compact, IP66 Stainless Steel enclosure RMS velocity in mm/s ► Measuring range 0-25 mm/s standard, and 0-50 mm/s special request. ► Can also monitor surface temperature with optional NTC or PT100 temperature sensor ► 2 wire 4-20mA loop powered sensor ► 3/4” NPT conduit fitting ► 1/4” – 28 Female UNF mounting thread. ► ATEX, IECEx, UKEx Zone 20 Approved ► Class II Div 1 Approved ► Monitors - VIBMIL Vibration Sensor 1/4"-28UNF – No Temp. - NRTL / ATEX / IECEx / UKEx ► VIBMIL21NV4CAI - VIBMIL Vibration Sensor 1/4"-28UNF - NTC Temp. Sensor - NRTL / ATEX / IECEX / UKEx ► VIBMIL21PV4CAI - VIBMIL Vibration Sensor 1/4"-28UNF - PT100 Temp. Sensor - NRTL / ATEX / IECEX / UKEx ► VIBMILM6 - VIBMIL 1/4”-28 UNF Male to M6 Male thread Adaptor ► VIBMILM8 - VIBMIL 1/4”-28 UNF Male to M8 Male thread Adaptor Copyright © 2023 4B Group. All rights reserved. Information is subject to change or modification without notice. Refer to instruction manual for installation information. CRD09

カタログの1ページ目を開く

Product Datasheet PRODUCT DATASHEET VIBMIL DIMENSIONS WIRE DESCRIPTION TECHNICAL SPECIFICATIONS Power Supply Power Dissipation Measuring Range • 0 – 25 mm/s RMS Velocity (VIBMILx1xVxx) • 0 – 50 mm/s RMS Velocity (VIBMILx2xVxx) (Depending on the model) Frequency Range 4 – 20 mA proportional to Measuring Range Maximum Load 600 Ohms at 24 VDC Supply Voltage Optional Temp Sensor Power-on Time Operating Temp Mounting Thread 1/4”-28 UNF female thread (supplied with 1/4”-28 UNF set screw) Mounting Torque Housing Material Stainless Steel 3m (9.8 ft) long, with 2 or 4 cores 24 AWG ATEX, IECEx, UKEx...

カタログの2ページ目を開く