4B - RotoSafe - Rotary Level Indicator
1 / 2ページ

お気に入りに追加する　

カタログの抜粋

Product Information Rotary Paddle Level Indicator APPLICATION The ROTOSAFE rotary paddle switch is designed to signal the presence or absence of bulk materials such as chemical products, wood chips, grain, granules and powders. It is ideal for bunkers, hoppers and silos as well as for blockage detectors in conveyor chutes. METHOD OF OPERATION The detection of material is achieved by a rotating paddle. If material impedes the rotation of the paddle, the motor topples on its axe and triggers a contact. The power supply to the motor is cut and the contact signals that the critical level has been reached. When the level of the material goes down again, the motor returns to its initial position and restarts. The ROTOSAFE has a « Failsafe » rotation detection circuit; it has a magnetic test allowing to shut the motor down. PADDLE SELECTION Four alternative paddles are available to detect a wide range of product from heavy to light densities. OPTIONS KITRTS – system allowing to have an adjustable level between 0,65 and 2,1 meters. Detailed specification, wiring diagrams and installation/operating instructions available immediately upon request. Detailed specification, wiring diagrams and installation/operating instructions available upon request. Please refer to instruction manual for correct installation. Information subject to change or correction. Nov 2018

カタログの1ページ目を開く

Product Information

カタログの2ページ目を開く

4B Braime Componentsのすべてのカタログと技術パンフレット

1. 

   4B Touchswitch - Belt & Pulley Misalignment Sensor

   2 ページ

2. 

   MDB bearing temperature sensors

   2 ページ

3. 

   Hazardmon - cloud-based hazard monitoring solution

   2 ページ

4. 

   4B - AutoSet RF Capacitance Point Level Probe

   3 ページ

5. 

   Watchdog Super Elite (WDC4) Bucket Elevator & Conveyor Hazard Monitor

   6 ページ

6. 

   WDB8 Bearing Temperature Sensors

   2 ページ

7. 

   Rub Block Kit - for belt alignment detection

   2 ページ

8. 

   WDB2 Bearing Temperature Sensors

   2 ページ

9. 

   RG4 Rotary Level Sensor

   6 ページ

10. 

    4B Pullswitch - Conveyor Safety Stop Switch

    2 ページ

11. 

    IE-GuardFlex - distributed hazard monitoring system

    2 ページ

12. 

    4B ATEX Junction Boxes

    1 ページ

13. 

    WDA4 - High Power Extended Range Magnetic Proximity Sensor

    2 ページ

14. 

    Milli-Con - Vibration & Surface Temperature Sensor

    2 ページ

15. 

    Milli-Vib - Vibration Sensor

    2 ページ

16. 

    4B Grain & Feed Industry Solutions

    12 ページ

17. 

    4B Universal Speed Relay (USR)

    2 ページ

18. 

    4B Cement Industry Solutions

    8 ページ

19. 

    4B VIBMIL vibration sensor

    2 ページ

20. 

    Encoder-Flex 1024 - Rotary Shaft Encoder & Gate Position Monitor

    2 ページ

21. 

    Sensor Mounting Kit for barrel sensors

    1 ページ

22. 

    Bulldog - Conveyor Belt Alignment and Rip Detection Switch

    2 ページ

23. 

    RG2 Rotary Paddle Level Indicator

    6 ページ

24. 

    RG3 Rotary Level Sensor

    7 ページ

25. 

    Ultra Heavy-Duty Stainless Steel Shaft Encoder

    2 ページ

26. 

    RLI - Rotray Paddle Level Indicator

    2 ページ

27. 

    4B IE-Node (Industrial Ethernet Node) - Remote Sensor Monitoring for PLC's & Automation Systems

    8 ページ

28. 

    4B Electronic Hazard Monitoring Systems & Level Indicators

    14 ページ

29. 

    4B Safety Brochure - Proactive Hazard Monitoring

    3 ページ

30. 

    4B Nylathane Industrial Elevator Buckets (AA, MF, AC)

    3 ページ

31. 

    ADB adjustable depth bearing temperature sensors

    5 ページ

32. 

    4B elevator buckets

    17 ページ

33. 

    Milli-Temp Bearing / Surface Temperature Sensor

    3 ページ

34. 

    Bucket Elevator & Belt Conveyor Monitoring Systems

    24 ページ

35. 

    WDB7 Surface type bearing temperature sensors

    2 ページ

36. 

    Millispeed - Shaft underspeed switch

    3 ページ

37. 

    4B Whirligig - Universal Shaft Sensor Mount for Speed Monitoring

    2 ページ

38. 

    4B Bolt-N-Go chains - forged chains with bolt-on flights

    6 ページ

39. 

    Inline Junction Box for Atex environments

    2 ページ

40. 

    4B Wheel Encoder - Conveyor Belt Wheel Sensor

    2 ページ

41. 

    IE-Node - Remote Sensor Monitoring for PLC's & Automation Systems

    2 ページ

42. 

    4B Forged Chains & Sprockets for the Toughest Applications

    5 ページ

43. 

    Elevator Bolts

    5 ページ

44. 

    4B Elevator Belting

    11 ページ

45. 

    RLI Shaker - Rotary Level Indicator

    2 ページ

46. 

    Binswitch Elite - Capacitive Blocked Chute / Level Sensor

    2 ページ

47. 

    Remote Autoset Radio-Frequency Level Indicator

    4 ページ

48. 

    P1003 and P1004 - 18mm Inductive Proximity Sensor

    3 ページ

49. 

    P3003 - 30mm Inductive Proximity Sensor

    3 ページ

50. 

    M3003 and M3007 Slipswitch (Underspeed Sensor)

    2 ページ

51. 

    M1003 Inductive Stopped Rotation Sensor

    2 ページ

52. 

    Slack - Broken Chain Detector (for chain conveyors)

    1 ページ

53. 

    P300 - Inductive Proximity Sensor

    3 ページ

54. 

    4B HotBus - Serial Network Bucket Elevator & Conveyor Monitoring

    5 ページ

55. 

    WDB1 Bearing Temperature Sensors

    2 ページ

56. 

    Vise Splice Elevator Belt Joiners

    1 ページ

57. 

    EASIFIT Elevator Bolts

    1 ページ

58. 

    FANG Elevator Bolts

    1 ページ

59. 

    Reference 70 Elevator Bolts

    2 ページ

60. 

    Euro Bolt

    1 ページ

61. 

    T400N Elite - Bearing Temperature Monitor

    2 ページ

62. 

    SpeedMaster Speed Switch Calibration Testing Device

    2 ページ

63. 

    WDA3 - New alignment sensor for bucket elevators

    2 ページ

64. 

    M800 Speedswitch - underspeed motion monitor

    2 ページ

65. 

    4B Sugar Mill Chains

    24 ページ

66. 

    Auto-Set Flush Probe - Radio Frequency (RF) Capacitance Plug Switch

    2 ページ

67. 

    Speed Relay (SR) - Underspeed Relay Contact for Rotation Monitoring

    2 ページ

68. 

    Cloud based hazard monitoring system for elevators / conveyors

    2 ページ

69. 

    JUMBO CC-S Elevator Buckets

    2 ページ

70. 

    ADB bearing temperature tester

    2 ページ

71. 

    BAP2 Alignment Sensor for Bucket Elevators

    2 ページ

72. 

    AUE400 - Rotation Control Module

    2 ページ

73. 

    Double and triple forged chain links

    1 ページ

74. 

    A400 - Belt Misalignment Monitor for Bucket Elevators

    2 ページ

75. 

    P800 - Inductive Proximity Sensor

    2 ページ

76. 

    4B Rotech Encoder

    2 ページ

77. 

    B400 - Belt Alignment Monitor for Conveyors

    2 ページ

78. 

    4B Tacho

    2 ページ

79. 

    X400 Alarmswitch

    2 ページ

80. 

    Whirligig Heavy Duty - Universal Shaft Sensor Mount for Rotation Monitoring

    2 ページ

81. 

    WDA HT - Heavy Duty Alignment Sensor for Bucket Elevators

    2 ページ

82. 

    P100 - Inductive Proximity Sensor 18mm

    2 ページ

カタログアーカイブ

1. 

   IE-NODE (Industrial Ethernet Ethernet Node) - Remote Sensor Monitoring for PLC’s & Automation Systems

   8 ページ

2. 

   RG1 - Rotary Paddle Level Indicator

   4 ページ

3. 

   4B Level Indicators

   7 ページ

4. 

   4B Speed Switches & Shaft Encoders

   5 ページ

5. 

   4B Hazard Monitors for Elevators & Conveyors

   7 ページ

6. 

   4B Binswitch - Capacitance Point Level Switch

   2 ページ

7. 

   Elevator Buckets, Bolts, Belting & Splices

   72 ページ

8. 

   Watchdog Elite - Bucket Elevator Monitor

   5 ページ

9. 

   M100 Stopswitch

   2 ページ

10. 

    Slack Chain Detection

    1 ページ

11. 

    4B explosion vent panels

    1 ページ

12. 

    M300 Slipswitch

    2 ページ

13. 

    4B Conveyor Belt Fasteners - Light and Heavy Duty

    4 ページ