Text version of the page

SURFACE CLEANER

Page 1 of 2 DESCRIPTION SURFACE CLEANER is a combination of solvents specially blended to aid in the preparation of new and used molds/tools prior to treatment with ZYVAX MOLD CONDITIONERS AND RELEASE AGENTS. It readily removes waxes and other surface contaminants without harming or dulling the working surfaces of the mold. SURFACE CLEANER will also clean brushes and spray equipment used to apply various release products and elastomeric materials. If a NON-HAZARDOUS cleaner is required, ZYVAX WATERCLEAN is available for this purpose . SURFACE CLEANER BENEFITS * Can be used to remove all release agents * Ease of Application and Use * Fast drying * No residue TYPICAL PROPERTIES Appearance & Odor : Clear, thin liquid with characteristic solvent odor Carrier : Blend of oxygenated and aromatic hydrocarbons Flash Point [C.C] : HOW TO USE 36 F (2 C) Coverage : Approx. 1200 sq. ft/gal Wt/Gallon : 7.04 lbs/Gallon Cure Mechanism : None 1. Apply SURFACE CLEANER liberally to the surface of the mold with a clean cloth. 2. As the waxes and other contaminants begin to dissolve and loosen, remove them from the surface while still wet using a separate clean cloth. Repeat this process until the mold is clean. 3. The cleaning cloths should be regularly replaced as they become saturated with wax, etc. 4. When all the contaminants have been removed, wipe the entire surface with a clean cloth soaked with SURFACE CLEANER , and gently buff until dry. NOTE : * As with all solvents, appropriate protective gear should be used when handling this product. Adequate ventilation should be employed, and solvent resistant gloves and respirators worn. * This product is flammable, and its use in the presence of heat, sparks, or open flames should be strictly avoided. For industrial use only; keep out of reach of children. * For excellent cleaning power without the use of solvents, use Zyvax WATERCLEAN product in place of SURFACE CLEANER .