Group: Zwick Roell Group
Catalog excerpts
Product Information LH hydrostatic bearing linear actuator assemblies Pic 1: Actuator LH Pic 2: Actuator mounted via adapter plate in the load frame Range of application Advantages/features The LH series actuators are specifically designed for high performance dynamic material and component testing. • Specifically designed to meet the high standards set This includes high frequency applications and high piston speeds. As well as applications that induce side loads and bending moments on the actuator. • Hydro static bearings for friction free operation and by servo-control systems high side load carrying capability • Synthetic coating for additional protection at The rated force of the cylinder will be achieved when the internal cylinder pressure is 265 or 195 bar. exceeding of the limit lateral force • Integral LVDT displacement transducer, linearity 0.25% • Hysteresis free operation • Hydraulic end cushions protect the actuator in the event end-cap impact • Head and foot mounting interfaces allow easy and rigid mounting • Available as standard actuator assemblies, or as PI530 2.10.04.xxx custom configurations PI530_Hydrostatische_Pruefzylinder.pmd
Open the catalog to page 1Product Information LH hydrostatic bearing linear actuator assemblies Order-No. Order-No. Cylinder Stroke Nominal force 210 bar BPS-LH0010.21.00 BPS-LH0010.21.01 BPS-LH0010.21.02 BPS-LH0025.21.00 BPS-LH0025.21.02 BPS-LH0025.21.03 BPS-LH0050.21.XX BPS-LH0050.21.XX BPS-LH0050.21.00 BPS-LH0100.21.00 BPS-LH0100.21.01 BPS-LH0250.21.XX BPS-LH0250.21.00 BPS-LH0500.21.XX BPS-LH0500.21.XX BPS-LH0500.21.XX BPS-LH1000.21.XX BPS-LH1000.21.00 280 bar BPS-LH0010.28.01 BPS-LH0010.28.XX BPS-LH0010.28.XX BPS-LH0025.28.01 BPS-LH0025.28.XX BPS-LH0025.28.XX BPS-LH0050.28.01 BPS-LH0050.28.XX BPS-LH0050.28.XX...
Open the catalog to page 2All ZwickRoell GmbH & Co. KG catalogs and technical brochures
-
Plastics & rubber
56 Pages
-
Extrusion plastometers
12 Pages
-
Image Brochure
20 Pages
Archived catalogs
-
Zwick/ZHU250
3 Pages
-
HC range
2 Pages
-
teachXpert Academia Package
2 Pages
-
Vibrophores 20-30 kN
2 Pages
-
Sheet forming 1000 kN
2 Pages
-
Creep Testing Kappa SS
4 Pages
-
Mflow Extrusion Plastometers
4 Pages
-
HDT/Vicat Allround_cool
2 Pages
-
Cflow Extrusion Plastometers
4 Pages
-
Specimen Grinder
2 Pages
-
Specimen blanking
3 Pages
-
DWT Pellini 550 and 1650
2 Pages
-
HIT pendulum impact testers
24 Pages
-
Hardness Testing with Zwick
24 Pages
-
Sheet forming 100/200 kN
2 Pages
-
TorsionLine 20 up to 500 Nm
2 Pages
-
TorsionLine 1000 bis 2000 Nm
2 Pages
-
roboTest P Metal
2 Pages
-
roboTest F_formstabil
2 Pages
-
roboTest A
2 Pages
-
Vibrophore HFP 5 and 10 kN
2 Pages
-
ProLine
2 Pages
-
PrecisionLine Automatic
2 Pages
-
testXpert II
20 Pages
-
Testing of plastics and rubber
68 Pages
-
HIT Pendulum Impact Testers
24 Pages
-
Hardness Testing with Zwick
36 Pages