Field Devices
AXESS TMC
Reads ISO 14443A and 15693 Legic “Prime” and Advant cards. Normally reads the unique serial number of the card (UID) or can be programmed to read the identifi cation code of the user from a block of card memory. FD-RA0x - Bi-directional
magnetic card reader FD-RE0x - Mono/bi-directional reader of Legic® cards Reads track 2 on magnetic cards to ISO 7812. Reads 125 KHz “read-only” cards with EM4102 64-bit format (10 numerical characters). Supports different decoding formats to adapt to the formats used by different card suppliers. FD-RD0x - Mono/bi-directional reader of 125 KHz EM4102 cards FD-RB0x - Mono/bi-directional reader of cards to ISO 1443/A (Mifare®) and B Reads 125 KHz HID® cards of all standard formats (Wiegand 26, 37 and 40 bit) and Corporate 1000. The format of the card to be read and the direction of transit can be confi gured by the application software XAtl@s. Normally reads the unique serial number of the card (UID) or can be programmed to read the identifi cation code of the user from a block of card memory. FD-RC0x - Mono/bi-directional reader of 125 KHz HID® cards FD-KA01 - Alphanumeric/function keyboard Used in conjunction with or as an alternative to card reading devices to select control functions, introduce PINs or introduce auto-causation codes for presence detection. In Intrusion Detection security systems, it can be used to activate/de-activate the system or portions of it. RFID/2 - Readers of proximity cards (tropicalised) RFID/2s are readers for generic purposes and read/write modules which can be used in all automatic identifi cation applications. On the buffered versions with Wiegand and Magstripe interface (Clockdata), the length of the connection can be up to 100m. With a bi-directional RS232 connection (or TTL), they allow for complete read/write management of multi-segment applications and multi-applications. Maximum security applications can be implemented with the use of LEGIC® Advant technology with encrypted transmission. The RFID technologies supported are:
• ISO 1443/A(Mifare®) and B • HID® 125 KHz
• EM4102 125 KHz
• Legic® FD-DA0x - Module 8 Input/Output The FD-DA0x module is capable of acquiring the status of sensors and/or contacts and managing electric locks and/or turnstiles or signalling devices such as sirens, lamps, etc.. The 8 available channels can be used in the following confi gurations:
• 8 digital inputs (on/off contact)
• 4 digital inputs and 4 balanced inputs
• 4 digital inputs and 4 outputs • 4 balanced inputs and 4 outputs
In supervised contact acquisition mode (for Intrusion Detection and access control), it can acquire 5 possible states (normal, alarm, tamper, cutting, short). FD-WA0x - Serial and Wiegand interface module The FD-WA0x is a module designed for interfacing the Field Processors with external devices by means of RS232 or RS485 or Wi-
egand serial connections. With RS232 or RS485, it is capable of operating at programmable speeds of between 300 baud and 115 Kbaud and managing full-duplex protocols in RS232.
If used for connecting third-party readers or other devices with Wiegand interface, it can manage up to three signalling devices (LED OK, LED KO, Buzzer). FD-BC01 - Power Supply controller This module is capable of controlling the status of power supplies and providing Field Processors with information relating to the presence of the primary power supply and the state of the batteries. Charges and checks the batteries even when the primary power supply is present. A key feature is the possibility of installing two or more FD-BC01s in parallel. By selecting a suitable number of FD-BC01s, a fault on one of them will not compromise the operational continuity of the system.
