Catalog excerpts
Technical Datasheet Panex® 35 Continuous Tow Commercial Carbon Fiber for Industrial Applications Description Panex® 35 continuous carbon fiber is manufactured from polyacrylonitrile (PAN) precursor. The consistency in yield and mechanical properties that are provided by large filament count strands gives the user the ability to design and manufacture composite materials with greater confidence and allows for efficient and fast buildup of carbon fiber reinforced composite structures. Panex® 35 50K fibers are available with a variety of sizing formats for different composite processing methods and for compatibility with a wide range of standard resin systems. Zoltek quality focuses on spool to spool consistency yielding low coefficients of variation. Material Overview Recommended Use Any article or component benefiting from the unique properties of carbon fiber composites. Applications Wind energy, automotive, petroleum production, aviation, marine, industrial, other transportation, medical (including X-ray), sports and recreation, etc. SI US Tensile Strength 4,137 MPa 600 ksi Tensile Modulus 242 GPa 35 msi 0.00155 ohm-cm 0.00061 ohm-in 1.81 g/cc 0.065 lb/in3 Fiber Diameter 7.2 microns 0.283 mils Carbon Content 95% 95% 270 m/kg 400 ft/lb Spool Weight 5.5 kg, 11 kg 12 lb, 24 lb Spool Length 1,500 m , 3,000 m 1,640 yd, 3,280 yd Electrical Conductivity Density Yield Zoltek Corporation | 3101 McKelvey Rd. | St. Louis, MO 63044 P: 314-291-5110 | F: 314-291-8536 | E: sales@zoltek.com | W: www.zoltek.com
Open the catalog to page 1Panex® 35 Continuous Tow Typical Packaging Certification Wound on a 3” x 11” (7.6 cm x 28 cm) cardboard spool, sealed in heat shrunk covering, and placed in cardboard box; two splices are permitted per every 1,500m spool and five per every 3,000m spool. Panex® 35 Continuous Tow is manufactured in accordance with Zoltek’s written and published data. A Certificate of Conformance is provided with each shipment. Spool outside diameter: » 1,500 m: 180-185 mm x 255-260 mm » 3,000 m: 235-245 mm x 255-260 mm Approval Safety Germanischer Lloyd (GL) has granted GL approval to Panex® 35 Continuous Tow...
Open the catalog to page 2All Zoltek catalogs and technical brochures
-
Zoltek?s Needlepunched Felts
2 Pages
-
Zoltek?s Pultruded Profiles
2 Pages
-
Chopped Pellet - Type 45
2 Pages
-
Chopped Pellet - Type 83
2 Pages
-
Pyron Brochure
6 Pages
-
Panex 30 Brochure
2 Pages
-
Panex 35 Brochure
6 Pages
-
Chopped Flake - Type 13
2 Pages
-
Oxidized Felt
2 Pages
-
Oxidized Staple Fiber
2 Pages
-
Pyron® Continuous Tow
2 Pages
-
High Twist Roving
1 Pages
-
Carbonized Yarn
2 Pages
-
Carbonized SCRIM Fabric
1 Pages
-
Panex® 30 Knit Fabric
1 Pages
-
Panex® 35 prepreg tapes
2 Pages
-
Zoltek?s Needlepunched Felts
2 Pages
-
Panex 35 Milled Fiber
2 Pages
-
Chopped Pellet - Type 65
2 Pages
-
Panex® 35 chopped fibers
2 Pages
Archived catalogs
-
PYRON® Product Forms
6 Pages