Selection - Calculation - ZIMM - #19

Text version of the page

Selection - Checklists - Calculations © by ZIMM Austria 2009 19 Length Calculation, Standing Version S - Protective Tube SRO 1) Basic length of protective tube without cap - add another 5 mm to the overall length of the protective tube to include the cap thickness. 2) If a shorter stroke than specified is required, fit the limit switches and the lubrication strip on two different sides (fitting location)! 3) Limit switches ES are always in combination with rotation protection VS (VS is included in the extension), with escape protection AS as from Z-250. Protective tube extension for S version Z-2 47 15 70 92 Z-5 46 15 73 94 Z-10 49 20 72 92 Z-25 53 20 72 96 Z-35 57 30 86 - Z-50 62 30 82 - Z-50/Tr50 62 30 82 - Z-100 82 30 62 - Z-150 87 30 62 - Z-2 to Z-150: Min. stroke with limit switch ES Min. stroke with ES and lubrication strip SL Attention: Minimum stroke with limit switch ES2): Z-2 53 123 Z-5 50 120 Z-10 51 121 Z-25 51 121 Z-35 41 111 Z-50 42 112 Z-50/Tr50 42 112 Z-100 42 112 Z-150 42 112 Protective tube extension for S version Z-250 87 30 46 - Z-350 97 35 51 - Z-500 151 40 40 - Z-750 152 40 40 - Z-1000 152 40 40 - Z-250 to Z-1000: Min. stroke with limit switch ES Min. stroke with ES and lubrication strip SL Attention: Minimum stroke with limit switch ES2): Z-250 47 117 Z-350 42 112 Z-500 46 116 Z-750 46 116 Z-1000 46 116 Z-2 to Z-150: Tr basic length1) Escape/rotation protection AS/VS Limit switch ES3) ES3) and hinged bearing plate KAR Z-250 to Z-1000: Tr basic length1) Escape protection AS Limit switch ES3) ES3) and hinged bearing plate KAR