Text version of the page

Additional Zero-Max

®

Motion Control Products

ETP Zero-Max CD
® Bushings
® Adjustable Speed Drives
® Couplings Locks hub to shaft easily without troublesome keys. 26 sizes from 3/4" to 4". Metrics from 8 mm to 100 mm. Stainless steel models. Variable 0 to 400 RPM outputs from constant input speeds to 2,000 RPM. Torques 12 to 200 in. lbs. Composite disc design that outperforms steel discs and elastomeric models. Torsional stiffness. 3°misalignment. Torques to 500,000 in. lbs. OHLA Posi-Lok Schmidt Couplings
® - Overhung Load Adapters
® Shaft Bushings Offset, In-line, Elastomeric and Control-Flex models. Sizes 5 to 500,000 inch lbs. torque. Overhung Load Adapters prevent failures. Athru F mounts. Keyed and spline shafts. Speeds to 3600 RPM. Specials. Inch and Metric sizes to 35 mm. Nickel plating offers cor- rosion protection. ServoClass Roh'lix Crown Right Angle Gear Drives
® WARRANTY Couplings
® Linear Actuators Two and three way models with 1:1 and 2:1 ratios. Spiral bevel gears. 3/8 to 1 inch dia. Stainless steel shafts. Zero backlash, torsionally stiff, high misalignment. Clamp hubs. 9 sizes. Torques to 880 in-lb. Inch and metric bore. Convert rotary motion into precise linear motion. Five models with 3/8" to 2" dia. shafts. Thrust ratings to 200 lbs. Overload protection.
Zero-Max, Inc. the manufacturer, warrants that for a period of 12 months from date of shipment it will repair, or at its option, replace any new apparatus which proves defective in material or workmanship, or whichdoes not conform to applicable drawings and specifications approved by the manufacturer. All repairs and replacements shall be F.O.B. factory. All claims must be made in writing to the manufacturer.In no event and under no circumstances shall manufacturer be liable for (a) damages in shipment; (b) failures or damages due to misuse, abuse, improper installation or abnormal conditions of temperature, dirt, wateror corrosives; (c) failures due to operation, intentional or otherwise, above rated capacities, and (d) non-authorized expenses for removal, inspection, transportation, repair or rework. Nor shall manufacturer ever beliable for consequential and incidental damages, or in any amount greater than the purchase price of the apparatus. Zero Max, Inc. reserves the right to discontinue models or to change specifications at any time without notice. No discontinuance or change shall create any liability on the part of Zero-Max, Inc. in respect to its prod-ucts in the hands of customers or products on order not incorporating such changes even though delivered after any such change.This warranty is in LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING (BUT NOT LIMITED TO) ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE TERMSOF THIS WARRANTY CONSTITUTE ALL BUYER’S OR USER’S SOLE AND EXCLUSIVE REMEDY, AND ARE IN LIEU OF ANY RIGHT TO RECOVER FOR NEGLIGENCE, BREACH OF WARRANTY, STRICT TORT LIABILITY OR UPONANY OTHER THEORY.Any legal proceedings arising out of the sale or use of this apparatus must be commenced within 18 months of the date of purchase. CAUTION: Rotating equipment must be guarded. Also refer to OSHA specifications and recommendations.Zero-Max ® , CD ® , ETP ® , ServoClass ® , Torq-Tender ® , Control-Flex ® , Posi-Lok ® and Roh'Lix ® are registered trademarks of Zero-Max, Inc.© Zero-Max 2003 Printed in U.S.A.OHLA™ is a trademark of Zero-Max, Inc. ® 13200 Sixth Avenue North, Plymouth, Minnesota 55441-5509800-533-1731 • (763) 546-4300 • Fax (763) 546-8260 • www.zero-max.com