Catalog excerpts
w Packaging solutions for military www.zarges.com and electronic equipment High Performance Cases NEW! ¨ K 470 universal containers IP 65 ¨ Mitraset® RRF ¨ and a wealth of innovations
Open the catalog to page 1Professional logistics solutions for special requirements Every single ZARGES box is the result of decades of experience in the design and production of re-usable containers for packaging, storage and transport applications. This know-how in the field of professional logistics solutions, plus high-quality aluminium as the basic material, are the ideal starting point for the design and manufacture of products for special requirements and applications. Extremely lightweight yet stable, corrosion-proof, non-magnetic and easily adaptable to a wide range of applications, ZARGES High Performance...
Open the catalog to page 2The strengths of ZARGES lie in the development of new products, the rapid implementation of new ideas in user-oriented, innovative solutions, adherence to the highest quality standards and comprehensive support for its customers. ZARGES know-how in development and production ZARGES has many years of experience in the development and production of logistics equipment for industry, trade and the public sector, designed to meet the highest quality requirements. At its main production site, ZARGES has state-of-the-art production and storage facilities with an area of more than 23,000 m2. Using...
Open the catalog to page 4Economical, safe and environmentally friendly: Aluminium is lightweight, yet extremely stable: The density of aluminium is only approx. 2.6 to 2.8 g per cm3. That is approx. 1/3 the density of steel. In spite of its low weight, aluminium is extremely strong. Aluminium is impact-resistant and extremely strong: Its surface dents on impact, but the force of the blow is absorbed by the deformation. In addition, aluminium is insensitive to extreme fluctuations in temperature: Within a temperature range of – 80 °C to + 150 °C, the material characteristics remain constant. Aluminium is...
Open the catalog to page 5Mitraset ® 19½ housing Housing for electronic instruments 6
Open the catalog to page 6Details ñ– Protection class IP 65 in accordance with DIN EN 60 529 and ICE 34-5/529 through seam-welded housing and lid with peripheral seal. ñ– Base with stacking battens, sheet metal cover with indentations to facilitate stacking. ñ– All sizes can be stacked inside each other (except NT610). ñ– Stable frame profile with integrated floating mounts for fasteners. ñ– Sides with recessed sprung drop handles. ñ– All sides and lid stiffened with moulded sections (except NT610). ñ– 8 rubber shock mounts with slide rails to support the anti-vibration frame. ñ– Lid with toggle-action snap...
Open the catalog to page 7Extract from the results of testing to MIL-STD-810 D / VG 95 446-2 5.11 Shock test ñ– Test 516.3 in accordance with VG MIL-STD-810 D-17. ñ– The shock test with recording of the damping values is to be carried out in the six main directions, each time with 3 half-sine shocks at an acceleration a = 40 g and a pulse time t = 7 ms. 5.3 Strength of carrying handles ñ– The test specimen is suspended in the normal position and loaded in such a way that there is a force of 375 N acting on each carrying handle. Then the test specimen is suspended by each handle separately and a load of 750 N...
Open the catalog to page 8Extract from the results of testing to MIL-STD-810 G / VG 95 446-2 ñ– MIL-STD-810 G method 506.5 Rain – Procedure I – Rain and Blowing Rain. Wind speed 28 m/s, at least 90 minutes per side. ñ– MIL-STD-810 F method 509.4 – Salt Spray – Duration of test 96 hours ñ– Resistant to mildew formation in acc. with MIL-STD-810 F method 508.5 – Fungus – Duration of test 28 days ñ– Shielding efficiency to MIL-STD-285 5.5.2 High temperature test ñ– Test 501.2 in accordance with VG MIL-STD-810 D-3, method I A2. ñ– 24 hours, 71 °C. Test as per specifications of hazardous goods directive Approval for...
Open the catalog to page 9Vibration damping Undesirable mechanical vibrations often occur in transport and in many other applications. These may have a negative effect on the function of electronic components and thus represent an increased safety risk. ZARGES Mitraset® housings offer a solution to vibration problems in military, aeronautical and aerospace applications as well as in industry. They are tested to MIL-STD-810. For special requirements, a modified Mitraset® housing has been developed and undergone successful testing in accordance with the strict specifications of MIL-STD-810 F. Mitraset ® 19½ housing 10
Open the catalog to page 10The following diagram shows the test specifications to FIGURE 514.5C-3.: Composite wheeled vehicle vibration exposure. MIL-STD-810 F, FIGURE 514.5 C-3. 1 0.1 0.01 0.001 0.0001 1 10 100 1000 Acceleration spectral density – g2/Hz Frequency – Hz (MIL-STD-810 F, 1 January 2000, ANNEX C) Vertical Transverse Longitudinal Vibration exposure in acc. with MIL-STD-810 F Category 4 Figure 514.5 C-3 Composite wheeled vehicle vibration exposure 5 10 100 500 Hz 5 10 100 500 Hz 1 0.1 0.01 0.001 0.0001 0.00001 10 1 0.1 0.01 0.001 Inner frame Input Measured values – vertical Transmission function AVG / AVG...
Open the catalog to page 11Mitraset® Components The precision-welded Mitraset® housing is made from high-strength aluminium sheets and profiles and protects sensitive electronic equipment against extreme temperature conditions, moisture and electromagnetic interference, while a specially designed anti-vibration frame cushions against mechanical shocks, impact or vibrations. (Some items shown in illustrations are non-standard accessories.) Rubber bumper Carrying handle Pressure compensation (3 variations) Earth connection Shock mount Rail Guide rail Float-mounted latch receptacle Toggle latch Housing Skirt seal...
Open the catalog to page 12Lids, handles, stacking features Handles Lid Stacking bars bottom Stacking recesses top Stacking diagram I Nominal depth 219 mm I Nominal depth 350 mm Depending on the respective depth I all other depths Housings in nominal depths 219 mm, 350 mm and 480 mm can be stacked together. Details ñ– Stacking recess on the top. ñ– Standard housing with additional strengthening ribs on the top and side walls. ñ– Recesses on the side walls for drop handles. ñ– Recess also suitable for accommodating pressure relief valve and humidity indicator. ñ– Screw-down lids can also be supplied. 205 11.5 11.5 14...
Open the catalog to page 13All ZARGES catalogs and technical brochures
-
Access steps
1 Pages
-
ZARGES - Spare parts - 2020
32 Pages
-
ZARGES mobile access steps
100 Pages
-
Z600 Mobile Scaffold Towers
52 Pages
-
ZARGES K470
8 Pages
-
Z 500 Seventec RC ladder
6 Pages
-
ZARGES Hauptkatalog 2017
356 Pages
-
Z 600 S-PLUS
44 Pages
-
EN 131-1+2
12 Pages
-
Special Solutions for Aviation
20 Pages
-
ZARGES main catalogue 2015
363 Pages
-
Z 600/Z 500 Ladders and more
196 Pages
-
Mitraset RRF
2 Pages
-
K 470 IP 65
2 Pages
-
Safety & More
12 Pages
-
Shaft equipment / Fixed ladders
20 Pages
-
Wind catalogue
36 Pages
-
Medical.Systems 2009/2010
69 Pages
-
Data disposal containers
8 Pages
-
ZARGES - work platforms
8 Pages
-
Z 600/Z 500 Ladders and more...
184 Pages