Oil water separators - ZANDER - #2

Ambient Temperature at Compressor Inlet: 25°C System Pressure: 7 bar g

Relative Humidity: 65%

(For conditions other than show, e.g. higher ambient temperatures, please contact ZANDER) Important Note:

Static oil/water separators are unable to separate stable emulsions or oils that are miscible in water. In such cases use the reliable ZANDER emulsion separation system aquafil-K.

For systems using refrigeration dryers multiply com­pressor flow by 0,75 and select separator from chart.

For systems using 1 or 2 stage piston/reciprocating compressors multiply compressor flow by 1.4 and select separator from srew compressor flow rates shown, ensuring due consideration is given to oil type.. For 3 or 4 stage piston/reciprocating compressors, please contact ZANDER.

Microfilters for oil-free and clean compressed air and gases • Activated-carbon adsorbers for odour-free and neutral compressed air • Sterilizing filters for aseptic compressed air • Steam filters • Ventilation filters • Autoclave filters • Vacuum filters • High-pressure filters up to 350 bar • Microfilter mufflers • MIN-DRY terminal dryers Electronically controlled condensate drain: series ecodrain ' Oil/Water separating systems: series ecosep-S, aquafil-K • Heat regenerated adsorption dryers: series WI, WVN • Heatless regenerated adsorption dryers: series KEN/ KEA, KM/KMA • Adsorption drying installations for special gases, such as CO2, natural gas, inert gas • Refrigeration dryers • Breathing air processing equipment ALB, KMB • Dew point meter

We reserve the right to change design and dimensions. ES I

Series ecosep* S L