membrane dryers Series Sunsep-W - ZANDER - #2

/ 2


catalogue search
P. 01
P. 02
Pages:


See other catalogues for ZANDER

Text version of the page
^inspired by technology
zander
zander
Technical Data
iwi emoran Dryer
Type
max. capacity At 8 bar a** (l/min)
A
B
C
Dimensions
D (mm)
E
F
G*3)
Weight without prefilter
(kg)
Microfilter
SWC M04-70
15
■75
-
-
-
M5
0,05
G 2 X
SWC M08-100
31
112
125
-
60
Rc 1/8"
0,26
G 2 X
SWC M15-100
120
15
112
125
-
60
Rc 1/8"
0,27
G 2 X
SWC 01-150
200
■70
40
150
134
-
60
Rc 1/4"
0,39
G 2 X
SWC 02-250
300
100
50
200
164
-
60
Rc 3/8"
0,69
G 2 X
SWC 02-200
400
70
40
195
134
-
60
Rc 3/8"
0,45
G 2 X
SWC 03-250
450
100
50
200
164
-
60
Rc 3/8"
0,71
G 2 X
SWB 01-100
200
240
33
335
167
60
Rc 1/4"
0,22
G 2 X
SWB 01-200
200
340
33
■33
435
167
60
Rc 1/4"
0,26
G 2 X
SWB 05-100
800
310
50
■59
442
209
87
Rc 3/8"
0,66
G 3 X
SWF M06-400
515
25
■25
580
167
60
Rc 1/4"
0,12
G 2 X
For the purification of
compressed
air and gases
Typical Applications:
• Electronic Industry
• Medical Technology
• Dental Surgeries
• Laboratories
• Gas Analysers
• Industrial Robots
• Pneumatic Controls
• Breathing Air
; m
1
Maturar* air dryer
sunsep
■ f —H w— b­-d-
SWC
The maximum dew-point difference is 40°C.
The regeneration air requirement at specific conditions is 15-18%. The flow rate as well as the regeneration air requirement are dependent on the operating pressure, inlet tem­perature and the dew-point of the compressed air.
The maximum permissible operat­ing pressure is 8.5 bar min/max compressed air and ambient tem­perature: -20oC/55°C. Higher oper­ating pressures available on request.
Membrane dryer guarantee
If fitted with a ZANDER X grade Microfilter and the element is changed every six months, there is a 3 year guarantee with the mem­brane dryer.
More detailed information is avail­able on request:
• For each type of Sunsep-W membrane dryer
• On deviation from standard con­ditions (technical data)
• For Microfilters
Pressure to atmosspheric dew-point
Membrane air dryer
sunsep s
40°
S bar (a)
bar (a)
o
O CI
"a
20° 0° -20°
cu □
ÇU
-40°'
-40° -30° -20° -10° 0° Atmospheric dew-point (°C)
10°
At 20°C and 1 bar (a).
SWF M06 - 400 and SWC M04-70 with­out regeneration bypass
SWC with internal regeneration bypass
Connection size only for membrane module
*1)
*2!
*3)
ZANDER produces:
Microfilters for oil-free and clean compressed air and gases • Activated-carbon adsorbers for odour-free and neutral compressed air • Sterilizing filters for aseptic compressed air • Steam filters • Ventilation filters • Autoclave filters • Vacuum filters • High-pressure filters up to 350 bar • Microfilter mufflers • MIN-DRY terminal dryers • Electronically controlled condensate drain: series ecodrain • Oil/Water separating systems: series ecosep-S, aquafil-K • Heat regenerated adsorption dryers:series WI, WVN, WKN • Heatless regenerated adsorption dryers: series KEN/KEA, KM /KMA • HDK • Adsorption drying installations for special gases, such as CO2, natural gas, inert gas • Refrigeration dryers • Breathing air processing equipment ALB, KMB • Dew point meter
ZANDER research seeks continously to improve product, therefore changes can occur without notice
SW E 10/2005
Series
ZANDER Aufbereitungstechnik GmbH
Im Teelbruch 118, D-45219 Essen Postfach 18 55 24, D-45205 Essen Tel. (0 20 54) 9 34-0 Telefax (0 20 54) 9 34-164 Internet: http://www.zander.de
zander

pageCatalog pdf di En 2012-06-22-01