GL Filter Series ? Element Type ZL - 4 Pages

Product - Specification

GL Filter Series - Element Type ZL

Brief Description

Parker Zander, High-performance GL-

series filters, containing ZL grade filter

elements are designed as depth-filters

for the reliable remove of 1 |jm solid

particulate and exhibit a filtration per-

formance of 99,925% in compressed

air or compressed nitrogen gas.

Innovative filter housing and filter ele-

ment design leads to optimum flow

characteristics at minimum pressure

drops: This results in cost savings

throughout the operating lifetime of the

filter element at reliable levels of filtra-

tion performance.

Highly-efficient, borosilicate nano-fibre

media with a voids volume of 96%

ensures high dirt-holding capacity at

constantly low differential pressure. This

efficiency is additionally supported by

deep-pleating technology enabling 4.5

times more effective filtration surface

area when compared with conventional

filter elements.

The light-weight, compact construction,

ensures a requirement for minimum

clearance below the filter bowl for ele-

ment removal. The simple method of

installing the filter element into the filter

bowl, in conjunction with a secure, air-

tight housing closure avoids installation

errors and prevents by-pass between

the contaminated and clean enclosures.

The inlet-port is clearly marked by an

aluminium feature above and below the

opening signifying the correct direction

of flow through the filter element.

Performance overview:

Model

Port Size1

Nominal2

Element

GL2ZL

1/4

36

CP1008ZL

GL3ZL

3/8

55

CP2010ZL

GL5ZL

1/2

72

CP2010ZL

GL7ZL

3/4

108

CP2020ZL

GL9ZL

1

216

CP3025ZL

GL11ZL

1 1/2

396

CP3040ZL

GL12ZL

1 1/2

576

CP4040ZL

GL13ZL

2

792

CP4050ZL

GL14ZL

2 1/2

1188

CP4065ZL

GL17ZL

2 1/2

1548

CP5065ZL

GL19ZL

3

2232

CP5080ZL

1: Port size as per DIN ISO

228 (BSP-P) or ANSI B 1.20.1

(NPT-F)

2: Flow rates in m3/h related to

1 bara and 20 °C, compressed

to 7 bar. Where the minimum

e

operating pressure deviates,

the actual flow rate must be

multiplied with the respective

correction factor f (see the

respective table) to determine

the required nominal flow rate

and the appropriately required

filter model.

Scope of supply:

Ready-to-install filter, complete with filter element and float drain ZK15NO/KN;

with optional differential pressure gauge ZD90GL and/or manual drain HV15.

Optionally available without a drain (in this case, not ready-to-install).

Parker

I

Zander

ENGINEERING YOUR SUCCESS.

GL Filter Series ? Element Type ZL
  1. P. 1

  2. P. 2

    Product-Specification GL Filter Series - Element Type ZL Materials Housing Upper/lower housingAluminium alloy with alochrome coating, outside...
  3. P. 3

    Product-Specification GL Filter Series - Element Type ZL Dimensions [mm] and weights [kg] SizeCDWeightGL2ZL6720823400.55GL3ZL8927038501.3GL5ZL8927038501.3GL7ZL8927038501.3GL9ZL13030946703.0GL11ZL13039946703.2GL12ZL164471571006.9GL13ZL164563571007.3GL14ZL164563571007.1GL17ZL1926857212010.3GL19ZL1928757212015.3 Product...
  4. P. 4

    Product - Specification GL Filter Series - Element Type ZL Accessories Differential pressure gauge fitted ModelFunctionsuitable forProduct...
Text version

All ZANDER catalogues and technical brochures

  1. AKM 1-8

    4 Pages

    En
  2. AKM 10-95

    4 Pages

    En

Archived catalogues

  1. Process filters

    12 Pages

    En
  2. Company history

    16 Pages

    En