W1200/160 Belt Conveyor - 5 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

Catalogue excerpts

Lower Silesian Machines Factory ZANAM-LEGMET Spҳłka z o.o. 59-101 Polkowice, ul. Kopalniana 7, Phone (+48 76) 847 09 05 www.zanam-legmet.pl e-mail: zanam-legmet@zanam-legmet.pl Belt conveyors of the LEGMET W1200/160 type are dedicated for underground mining of ores and should be installed in haulage routes incorporating high-capacity conveyors. The LEGMET conveyors can be also used in other industrial sectors whenever haulage equipment with adequate parameters is desired. Design of the LEGMET W1200/160 conveyors makes it possible to use the equipment for heavy-duty and very specific applications. The conveyors are widely operated in copper ore mines of the KGHM Polska Mied S.A. (KGHM Polish Copper plc.) The LEGMET W1200/160 conveyors use belts of 1200 mm width. They can be applied to material haulage with rates up to 2000 t/h in underground workings with incline angle up to +15 and decline angle to -5 а . > TECHNICAL SPECIFICATION 2008 size="-2">

 Open the catalogue to page 1

W1200/160 Conveyor structure > 11 01 Discharging station 02 Outlet section 03 Driving station 04 Pass-through section 05 Loot with a tensioning weight 06 Decline section 07 Conveying route with fixed or articulated three-roller pulley sets 08 Rehandling station 09 Belt return station 10 Electric equipment 11 Self-response extinguishing unit SUG-3 > TECHNICAL SPECIFICATION 2008 size="-3">

 Open the catalogue to page 2

Options for driving stations W1200/160 2x160 kW 3x160 kW 4x160 kW Three-roller pulley set > TECHNICAL SPECIFICATION 2008 size="-2">

 Open the catalogue to page 3

Belt width Bђ 1200 mm Height of tensioning pylons 10270 mm 6370 mm Belt trough angle ю Ғ 33 > o 35 > o 2,0 m/s Tensioning rope transmission ratio ֑i Belt speed vђ 3,15 m/s 2,5 m/s > p 4 or 5 Drum diameter ҏ 630 mm 2x160 kW Power of a driving station ƑN 4x160 kW 3x160 kW > Spacing between conveyor supports down the route 2500 mm > Spacing between upper roller sets 1250 mm Spacing between lower roller sets 2500 mm Upper roller diameter 133 mm at v=2,0 m/s 1640 Mg/h Lower roller diameter 108 mm at v=2,5 m/s 2100 Mg/h +15 > o Ӗ inclined at v=3,15 m/s 2580 Mg/h Maximum allowed angles for conveyor routes...

 Open the catalogue to page 4

main drive 3 x 160 kW + intermediate drive 2 x 160 kW, or main drive 4 x 160 kW + intermediate drive 1 x 160 kW > napԴd gڳwny 3x160kW + napd poԊredni 2x160kW lub napd gԚwny 4x160kW + napd po㴊redni 1x160kW main drive 4 x 160 kW + intermediate drive 2 x 160 kW > napd gԚwny 4x160kW + napd po㴊redni 2x160kW main drive 2 x 160 kW + intermediate drive 2 x 160 kW, lub main drive 3 x 160 kW + intermediate drive 1 x 160 kW, lub main drive 4 x 160 kW with no intermediate drive > napd gԚwny 2x160kW + napd po㴊redni 2x160kW lub napd gԚwny 3x160kW + napd po㴊redni 1x160kW lub napd gԚwny 4x160kW bez napdu po㴊redniego...

 Open the catalogue to page 5

All ZANAM-LEGMET Spolka z o.o. catalogues and technical brochures

  1. Scaler SWKS-5

    1 Pages

    En
  2. Scaler SWKS-1

    1 Pages

    En
  3. Loader LKP-0301

    1 Pages

    En
  4. Loader LKP-1601B

    1 Pages

    En
  5. Loader LKP-0402

    1 Pages

    En
  6. LKP-0900B

    1 Pages

    En
  7. LKP-0806

    1 Pages

    En
  8. LKP-0405

    1 Pages

    En
  9. LKP- 0403A

    1 Pages

    En
  10. LKP- 0301

    1 Pages

    En
  11. LKP-0903

    1 Pages

    En
  12. LKP-0805C

    1 Pages

    En
  13. LKP-0403C

    1 Pages

    En
  14. LKP- 0301A

    1 Pages

    En
  15. Crusher

    22 Pages

    En