• Products
  • Catalogues
  • Projects
  • News & Trends
  • Exhibitions

RIB roof evolution - 12 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

Catalogue excerpts

RIB-ROOF EVOLUTION CONVINCING IN DESIGN AND FUNCTION Simplicity is our challenge – Evolution the result! RIB-ROOF metal roofing systems stand for high functionality and safety. Our products save time, costs and problems as we emphasize handling and use. RIB-ROOF Evolution follows these basic ideas, gaining experience and developing further designs. By focusing on our principles, we have developed a design which satisfies both visually and functionally. The slim and round-shaped profiled sheet seam makes RIB-ROOF Evolution creative and interesting. Of course, RIB-ROOF Evolution offers Zambelli’s...

 Open the catalogue to page 2

RIB-ROOF EVOLUTION EXPLAINED SIMPLE AND QUICK We at Zambelli know that speed is only a question of technique. If it must be done quickly, you can watch the basic installation steps for RIB-ROOF Evolution in a film. Both on the PC and on your smartphone when travelling or even at construction site. FILM OF INSTALLATION PRINCIPLE RIB-ROOF EVOLUTION SLIDING STANDING SEAM ROOF WITH DIRECTIONAL CLIPS ON WOODEN LATHING http://install-evolution-wooden.zambelli.de FILM OF INSTALLATION PRINCIPLE RIB-ROOF EVOLUTION SLIDING STANDING SEAM ROOF WITH DIRECTIONAL CLIPS ON Z-PROFILES FILM OF INSTALLATION PRINCIPLE...

 Open the catalogue to page 3

DELIVERY PROGRAM RIB-ROOF EVOLUTION straight tapered convex curved concave curved tapered convex curved tapered concave curved TAPERED PROFILED SHEETS RIB-ROOF Evolution profiled sheets are also available tapered, curved or tapered curved. Tapered profiled sheets with a minimum construction width of 230 mm and a maximum standard width of 500 mm are executable. Apart from the standard width of 500 mm, we are prepared to manufacture other construction widths on request, e.g. 333 mm, 400 mm or up to 600 mm as a maximum. CURVED PROFILED SHEETS Depending on the material and material thickness (t in...

 Open the catalogue to page 4

MATERIAL AND SURFACE SELECTION TAKE ADVANTAGE OF DIVERSITY The materials and colours shown below are on stock. COLOUR-COATINGS Steel Aluminium mill finish / stucco-embossed Aluminium mill finish / stucco-embossed, protective plating on both sides sheet galvanised, polyester coated RAL 3009 oxide red sheet galvanised, polyester coated sheet galvanised, polyester coated steel sheet with alu-zinc alloy corrosion protection class III Aluminium polyester coated Titanium zinc mill finish / pre-weathered Aluminium polyester coated sheet galvanised, polyester coated 0.7 / 0.8 / 1.0 mm Aluminium polyester...

 Open the catalogue to page 5

RIB-ROOF METAL ROOFING SYSTEMS SPANS / CLIP DISTANCES RIB-ROOF EVOLUTION SPANS / CLIP DISTANCES RIB-ROOF EVOLUTION Directional clip 200 Evolution Wind loads Wind zone 1 according to DIN inland EN 1991-1-4/NA Wind zone 2 inland Clip distance (m) with H Wind zone 3 inland Clip distance (m) with Wind zone 4 inland Clip distance (m) with H Clip distance (m) with thick- (standard (edge (corner (standard (edge (corner (standard (edge (corner (standard (edge (corner span limit material ness area) area) area) area) area) area) area) area) area) area) area) area) for acces(mm) cpe,1=- 1.2 cpe,1= -2.0 cpe,1= -2.5...

 Open the catalogue to page 6

RIB-ROOF METAL ROOFING SYSTEMS SPANS / CLIP DISTANCES RIB-ROOF EVOLUTION Directional clip 200 Evolution Wind loads Wind zone 2 according to DIN coasts and islands EN 1991-1-4/NA of Baltic Sea Wind zone 3 coasts and islands of Baltic Sea Clip distance (m) with H Wind zone 4 coasts of North and Baltic Sea as well as islands of Baltic Sea Clip distance (m) with Wind zone 4 islands of North Sea Clip distance (m) with H Clip distance (m) with thick- (standard (edge (corner (standard (edge (corner (standard (edge (corner (standard (edge (corner span limit material ness area) area) area) area) area)...

 Open the catalogue to page 7

RIB-ROOF METAL ROOFING SYSTEMS SPANS / CLIP DISTANCES RIB-ROOF EVOLUTION SPANS / CLIP DISTANCES RIB-ROOF EVOLUTION Turned directional clip 70 Evolution Wind loads Wind zone 1 according to DIN inland EN 1991-1-4/NA Wind zone 2 inland Clip distance (m) with H Wind zone 3 inland Clip distance (m) with Wind zone 4 inland Clip distance (m) with H Clip distance (m) with thick- (standard (edge (corner (standard (edge (corner (standard (edge (corner (standard (edge (corner span limit material ness area) area) area) area) area) area) area) area) area) area) area) area) for acces(mm) cpe,1=- 1.2 cpe,1= -2.0...

 Open the catalogue to page 8

RIB-ROOF METAL ROOFING SYSTEMS SPANS / CLIP DISTANCES RIB-ROOF EVOLUTION Turned directional clip 70 Evolution Wind loads Wind zone 2 according to DIN coasts and islands EN 1991-1-4/NA of Baltic Sea Wind zone 3 coasts and islands of Baltic Sea Clip distance (m) with H Wind zone 4 coasts of North and Baltic Sea as well as islands of Baltic Sea Clip distance (m) with Wind zone 4 islands of North Sea Clip distance (m) with H Clip distance (m) with thick- (standard (edge (corner (standard (edge (corner (standard (edge (corner (standard (edge (corner span limit material ness area) area) area) area)...

 Open the catalogue to page 9

RIB-ROOF METAL ROOFING SYSTEMS SPANS / CLIP DISTANCES RIB-ROOF EVOLUTION SPANS / CLIP DISTANCES RIB-ROOF EVOLUTION Turned directional clip 200 Evolution Wind loads Wind zone 1 according to DIN inland EN 1991-1-4/NA Wind zone 2 inland Clip distance (m) with H Wind zone 3 inland Clip distance (m) with Wind zone 4 inland Clip distance (m) with H Clip distance (m) with thick- (standard (edge (corner (standard (edge (corner (standard (edge (corner (standard (edge (corner span limit material ness area) area) area) area) area) area) area) area) area) area) area) area) for acces(mm) cpe,1=- 1.2 cpe,1= -2.0...

 Open the catalogue to page 10

RIB-ROOF METAL ROOFING SYSTEMS SPANS / CLIP DISTANCES RIB-ROOF EVOLUTION Turned directional clip 200 Evolution Wind loads Wind zone 2 according to DIN coasts and islands EN 1991-1-4/NA of Baltic Sea Wind zone 3 coasts and islands of Baltic Sea Clip distance (m) with H Wind zone 4 coasts of North and Baltic Sea as well as islands of Baltic Sea Clip distance (m) with Wind zone 4 islands of North Sea Clip distance (m) with H Clip distance (m) with thick- (standard (edge (corner (standard (edge (corner (standard (edge (corner (standard (edge (corner span limit material ness area) area) area) area)...

 Open the catalogue to page 11

All Zambelli catalogues and technical brochures

  1. STOCK CUBES

    2 Pages

    En
  2. LFT 20/40 series

    4 Pages

    En
  3. FRC

    2 Pages

    En
  4. AP200XL

    2 Pages

    En

Archived catalogues

  1. LFT50-150

    4 Pages

    En
  2. LFT20-40

    4 Pages

    En
  3. AP200

    4 Pages

    En