http://www.zagar.com

Basic Drill Heads & Spindles - ZAGAR - #5

/ 6

catalogue search

P. 01

P. 02

P. 03

P. 04

P. 05

P. 06

Pages:

See other catalogues for ZAGAR

You may also be interested in

Drilling center, Drilling head, Drill, Drilling unit, Clamping element

Text version of the page

Untitled

Square or Diagonal (Multiple Spinciie Heads)

SQUARE HEAD CAPACITY

DIAGONAL HEAD IN-LINE CAP.

Maximum Spindle Area - See Note

In-Line Spindle Ctr. Dist. - See Note


	HEAD	HEAD SERIES
	SIZE	200	400	500
	*3 76.20	1.670 42.42	—	—
	4.5 114.30	2.935 74.55	—	—
	6 152.40	4.475 113.67	—	—
	8 203.20	5.915 150.24	5.575 141.61	—
	10 254.00	7.880 200.15	7.540 191.52	7.030 178.56
	12 304.80	9.880 250.95	9.540 242.32	9.030 229.36
	16 406.40	13.725 346.62	13.385 339.98	12.925 328.16


	HEAD	HEAD SERIES
	SIZE	200	400	500
	*3 76.20	1.830 46.48	—	—
	4.5 114.30	3.111 79.02	—	—
	6 152.40	5.374 136.50	—	—
	8 203.20	7.410 188.21	6.400 162.56	—
	10 254.00	10.190 258.83	9.179 233.15	8.170 207.51
	12 304.80	13.018 330.66	12.006 304.94	11.000 279.40
	16 406.40	18.455 466.76	17.444 443.09	16.510 419.35

Square Heads - On Head Centerline Diagonal Heads - 45 Off Head Centerline 1/4-20 on 3 and 41/2 Heads 3/6-16 on 6 thru 16 Heads

*3" Head - .375 Maximum Spindle

*3" Head - .375 Maximum Spindle NOTE: In-line capacity calculated on basic spindle size for each series.


			HEAD SPECIFICATIONS
	Head		G		R					N
	Assembly	HEAD	Guide	W	Tie	P	T	S	J	-.001	F	HE
	No.	SIZE	Pin		Rod					-.003		200
	708-3630		4.7500	1.0000	3.30	1.70	—	—	6.25	2.125	2.56	4.71
	+SERIES	76.20	120.65	25.40	83.82	43.19			152.40	53.98	65.02	119.63
	708-3640	4.5	6.6250	1.6870	6.62	.60	—	—	8.12	3.000	3.50	5.44
	+SERIES	114.30	168.28	42.85	168.14	15.24			200.15	76.20	88.90	138.17
	708-3550	6	8.2500	2.5000	8.25	1.00	—	—	9.75	3.000	4.88	5.63
	+SERIES	152.40	209.55	63.50	209.55	25.40			241.30	76.20	123.95	143.00
	708-3560	8	10.1250	3.1250	10.12	1.50	—	—	12.25	4.500	5.50
	+SERIES	203.20	257.18	79.38	257.04	38.10			307.85	114.30	139.70
	708-3570	10	12.3750	3.8750	12.88	1.75	—	—	14.88	4.500	5.50
	SERIES	254.00	314.33	98.43	327.15	44.45			374.65	114.30	139.70
	708-3580	12	14.3750	4.8750	14.37	2.25	10.00	4.87	16.88	4.500	5.50	6.50
	+SERIES	304.80	365.13	123.83	364.99	57.15	254.00	123.69	425.45	114.30	139.70	165.10
	708-3620	16	18.3750	6.8750	18.37	3.00	14.00	6.87	SEE	4.500	5.50
	+SERIES	406.40	446.73	174.63	466.59	76.20	355.60	174.49	NOTE	114.30	139.70

D


	Tie Rod Hole Y	Guide Pin. Dia. H	Driver	Drive (See Pg. 12)
			MORSE TAPER	**A
	.44 11.18	.6250 15.88	1-2-3 JACOBS TAPER 1-2-33	**B
	.44 11.18	1.0000 25.40		**C FOR
				200 and
	.56 14.22	1.2500 31.75	MORSE TAPER 2-3-4-5	400 D FOR 500 Series

HEAD SERIES

8.00

203.20

9.94

*3" Head - .375 Maximum Spindle

NOTE: J=20.88 for 16" J=22.50 for 16"

Square Heads **See Page 9 for Drive Capacities

Diagonal Heads NOTE: Smaller numbers are metric conversions.

See Pages 26 - 38 for Standard Drilling and Tapping Fixtures and Components See Page 34 for Single Pitch Head Lead Screw Tapping.