Catalogue - Basic Drill Heads & Spindles - ZAGAR - (Version JPG)

See other catalogues for ZAGAR

Drilling machine, Drill, Drilling head, Clamping device, Collet chuck

Text version of the page

Select Spindle Series & Sizes (by holes, spacing & materials)

SPINDLE NO. 708-3601

1—r

I I

1.250 31.7 Basic Swindle

1.250

Heavy Duty 1.500 Min Centers

Spindle Size" Spindle Size (MM) -Max. Collet Capacity-

.62! 15.Í

500 SPINDLE SERIES

Minimum Center Distance is determined by adding spindle size and dividing by two.

.594

.688

.875

1.125

1.325

15.08

17.47

22.22

28.57

34.92

Drill Shanks must be turned down on sizes shown if greater than Collet Capacity


	STEEL	.233	.281	.406	.531	.625	.687
Capacities		5.92	7.14	10.16	13,49	15.88	17.45
when	CAST IRON	.282	.312	.453	.656	.750	.812
Drilling		7.16	7.92	11.50	16,66	19.05	20.62
	ALUM.	.500	.594	.687	.937	1.125	1.250
		12.70	15.09	17.45	23,80	28.58	31.75


	SPINDLE	SIZE	.562	.625	.750	1.000	1.250	1.500
Capacities when Tapping	SPINDLE	SIZE	14.27	15.88	19.05	25.40	31.75	38.10
	Steel or	Thread	12-24	1/4-20	3/8-16	1/2-13	5/8-11	3/4-10
	Brass	Size		M 6x1	M 8x1.25	M 12x1.75	M 14x2	M 20x2.5
	Alum.	Thread	5/16-18	3/8-16	1/2-13	3/4-16	1"-8	1-1/8-7
	Mag. Zinc	Size		M 8x1.25	M 12x1.75	M 20x2.5	M 24x 3	M30x3.5

NOTE: THE BASIC SPINDLE (1.250) IN THE 500 SERIES SHOULD BE USED THEN THE CENTER DISTANCE BETWEEN SPINDLES IS NOT LIMITED

SPINDLE NO. 708-3110

.7501 19.0 .375

1.0001

25.4

.500

Spindle Size Spindle Size (MM) Max. Collet Capacity

800

SPINDLE SERIES

Minimum Center Distance is determined by adding spindle size and dividing by two.

.875

1.125

1.375

1.625

22.22

28.57

34.92

41.27

Drill Shanks must be turned down on sizes shown if greater than Collet Capacity


	STEEL	.437	.562	.687	.750	.875
Capacities	STEEL	11.10	14.27	17.45	19.05	21.45
when	CAST IRON	.500	.687	.812	.875	1.000
Drilling	CAST IRON	12.70	17.45	20.62	21.44	25.40


SPINDLE SIZE		.750 19.05	1.000 25.40	1.250 31.75	1.500 38.10	1.750 44.45
Steel or	Thread	3/8-16	1/2-13	5/8-11	3/4-10	1"-8
Brass	Size	M 8x1.25	M 12x1.75	M 14x2	M 20x2.5	M 24x3

Capacities when

Tapping

NOTE: THE BASIC SPINDLE (1.750) IN THE 800 SERIES SHOULD BE USE WHEN THE CENTER DISTANCE BETWEEN SPINDLES IS NOT LIMITED

Capacities shown are not absolute and are subject to modification. NOTE: Smaller numbers are metric conversions.

Basic Drill Heads & Spindles - ZAGAR - #2

Drilling machine, Drill, Drilling head, Clamping device, Collet chuck