Catalogs >
GS Yuasa >
MB-2060 (2A/4A/6A single output)

MB-2060 (2A/4A/6A single output)
1Pages

Catalog excerpts

For VRLA & Conventional type Motorcycle batteries AUTOMATIC BATTERY CHARGER (Applied Battery type: 12V ■ 2~21Ah/10HR) This 2A/4A/6A selectable output current battery charger has the following advantages when compared with normal charger (Semi-CV type) and is suitable for both VRLA& Conventional type lead acid motorcycle batteries. 1. Selectable output current Output current can be selected suitable for any capacity of Yuasa motorcycle battery. 2. Capability to charge deeply discharged batteries Deeply discharged batteries can be recharged using the recovery-charging mode. 3. Determination if battery can be recovered Determines if the battery can be recovered after 30 min. as indicated by LED. Charging will stop automatically after 12 hours maximum. ("NEW" mode) 5. Safety charging for new battery Safety charging mode for charging newly acid filled battery. ("NEW" mode) 6. Maintain charging function Switch to maintain charging mode max. after 10 hours maximum to keep battery in charged condition. ("NORMAL" mode) ^Explanation of charging mode: "NEW" : Mode for newly acid filled battery in the event that the battery voltage does not reach to 12.5V 20 minutes after filled with acid. "NORMAL": Mode for battery once in use. ® Reverse connection and Short circuit (D Spark prevention when connecting charging clips ® Automatic shut-off when charging clip is disconnected ® Over charge-high current protection (Output) ® Reverse current prevention (3.0mA or less) (D Thermally protected transformer prevents overheating (7) Safety charging function for charging newly acid filled battery ("NEW" mode) (Note: Specification shown on this leaflet may change time to time without notice)

Open the catalog to page 1

MB-2060 (2A/4A/6A single output) 1Pages

Catalog excerpts

All GS Yuasa catalogs and technical brochures

MB-2060 (2A/4A/6A single output)
1Pages