MB-2060 (2A/4A/6A single output) - YUASA - #1

This 2A/4A/6A selectable output current battery charger has the following advantages when compared with a normal charger (Semi-CV type) and is suitable for both VRLA & Conventional type lead acid motorcycle batteries.

■ Features

1. Selectable output current

Output current can be selected suitable for any capacity of Yuasa motorcycle battery.

2. Capability to charge deeply discharged batteries

Deeply discharged batteries can be recharged using the recovery-charging mode.

3. Determination if battery can be recovered

Determines if the battery can be recovered after 30 min. as indicated by LED.

4. Automatic shut off

Charging will stop automatically maximum after 12 hours. ("NEW" mode]

5. Safety charging for new battery

Safety charging mode for charging newly acid filled battery. ("NEW" mode)

6. Maintenance charging function

Switch to maintain charging mode max. after 10 hours to keep battery in charged condition. ("NORMAL" mode) ■X Ex plana lion of charging mode:

"NEW" : Mode for newly acid filled battery in the even! that (he battery voltage does not reach to 12.5V

20 minutes after filled with acid. "NORMAL": Mode for battery once in use.

■ Protection

© Reverse connection and Short circuit

(2) Spark prevention when connecting charging clips

© Automatic shut-off when charging clip Is disconnected

@ Over charge-high current protection [Output]

(Si Reverse current prevention (3.0mA or less)

© Thermally protected transformer prevents overheating

(7) Safety charging function for charging newly acid filled battery ("NEW" mode)