YTRON-ZC powder dispersion unit "table design" - YTRON Process Technology - #1

Text version of the page

Technical data Water/liquid flow rates 6.000-8.000 l/h Powder capacity, depending on type of powder max. 1.500 kg/h Rotor speed (adjustable, max. value) ca. 6.000 1/min Total power required 7,70 Mechanical seal Single acting or with quench Liquid inlet DN 40 Liquid outlet DN 50 Powder inlet DN 50 Volume of hopper ca. 15 l Standard dimensions (LxWxH mm) 1250 x700 x1000 Max. allowable discharge pressure approx. 1,0 bar YTRON-ZC Dispersing Table YTRON® PROCESS TECHNOLOGY YTRON Process Technology GmbH & Co. KG · Handwerkerpark 21 · D-83093 Bad Endorf Tel. +49(0)8053 7 9910-0 · Fax +49(0)8053 7 9910-20 · service@ytron.com · www.ytron.com Advantages: • In a single pass setup, the use of this YTRON means no shear damage to shear sensitive thickeners. When used in recirculation, the YTRON can be used to apply a defined amount of shear to homogenize or emulsify the product. • Rotor/Stator slot widths and combinations are selected to suit the specific purpose. • No introduction of addition of air except the air present between the powder particles. • High efficient dispersing in combination with low energy input • ATEX rated version available for zone 1; 2; 21; 22 • Dispersing of powders in a single pass without the formation of any agglomerates • Versatile system to be used e.g. for dispersing of hydrocolloids of all kind, starches, milk proteins, MC, CMC, HPMC, guar, pectin, carbomeres • Spontaneous dispersion in a single pass means a significant reduction of ripening time.