TCMO & TSMC reciprocating two-stage compressors - YORK Refrigeration - #1

/ 2


catalogue search
TCMO & TSMC reciprocating two-stage compressors - YORK Refrigeration
P. 01
TCMO & TSMC reciprocating two-stage compressors - YORK Refrigeration
P. 02
Pages:
TCMO & TSMC reciprocating two-stage compressors - YORK Refrigeration


See other catalogues for YORK Refrigeration

Text version of the page
mom
Refrigeration
Technical documentation
TCMO & TSMC reciprocating two-stage compressors
The TCMO & TSMC two-stage compressors complete the comprehensive range of reciprocating compressors avail­able from YORK Refrigeration - all designed for heavy-duty industrial, offshore and marine applications. These com­pressors have a proven ability to work year after year under the toughest conditions, resulting in thousands of satisfied customers all over the world.
With 8 different sizes providing a low-pressure side dis­placement from 175-1283 m3/h at maximum speed and with guaranteed ratings for almost all refrigerants, there is a model ideally suited to every application. In all low-tem­perature refrigeration installations, two-stage reciprocating compressors will be an economical operating alternative to single-stage screw compressors.
TCMO 28 direct driven unit with shell-and-tube intermediate cooler
Spring-loaded safety heads
Asbestos-free gaskets
Balanced refrigerant-tight shaft seal
Minimal spare parts requirements
Easy maintenance due to good accessibility
Fully repairable on site.
Main features
The comprehensive list of outstanding features includes:
Operating efficiency and safety
• Fully unloaded start
• Automatic capacity regulation ^ Low noise and vibration levels
^ High coefficient of performance (COP)
^ Excellent part-load characteristics
^ Internal bypass valve to avoid excessive pressure
Quality and reliability
• Integrated discharge manifold
• Integrated suction manifold with filter
 Internal oil filter and gear-type oil pump
 Cylinder liners with hardened surface
^ Lightweight pistons with hard chromium piston rings
^ Gas-dampened discharge valves
^ Stop valves with non-rising spindle
^ Casing in grey cast iron of GG25 quality
^ Crankshaft in nodular ductile cast iron of GGG70 quality
 Casing, covers, crankshaft, connecting rod and cylinder liners manufactured in YORK's own Meehanite foundries to ensure full process control
^ Design pressure 26 bar.
Standard equipment
 Compressor block with oil pump and oil filter
 Solenoid valves for capacity control
J V"""
TSMC 108 direct driven unit with closed flash intermediate cooler

pageCatalog pdf di En 2012-06-22-01