See other catalogues for
YANMAR Construction
You may also be interested in
Text version of the page
| | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Dimensions | | |
| | | Unit:It-in (mm) | | |
| | | |
| | | | | | | | | | BHBBHHB3SBHHH | | | | A | 7'03 (2200) | | | | B | 77" (2310) | | | | c | 6'8" (1850) | | | | D | 12'2" (3710) | | | | E | 11 '4° (3450) | | | | F | 5'0" (1525) | | | | G | 12'1" (3690) | | | | H | 8'8" (2630) | | | | 1 | 5'0" (1535) | | | | J | 77° (2300) | | | | K | 10"(260) | | | | L | 3'1" (950) | | | | | 4'1" (1250) | | | | M | 9" (230) | | | | N | 7" (175) | | | | 0 | 5" (125) | | | | P | 2'01" (640) | | | | Q | 1'04" (400) | | | | R | 3" (85) | | | | S | 2'1" (R640) | | | | | | | | | |
| | | |
| | | Standard Equipment • Blade • Boom swing function_ • Rubber tracks_ • 2way control pattern change • Auxiliary valve and piping (arm end) • Cylinder cover (boom,arm,bucket,blade) • ROPS / FOPS canopy_ • Joystick pilot controls_ • Arm rests (adjustable) _ • High Back seat_ • Seat belt_ • Travel levers and pedals_ • Traveling alarm_____ • Built-in type boom light_ • Variable tracks__ • Operation manual_ (Please note that the standard equipment may vary from this list. Consult your Yanmar dealer for confirmation) | | |
| | | Specifications | | |
| | | | | | | | | | | | Model Type | | Vio17 Canopy | | | | Operating weight | Rubber track | lbs (kg) | 3836 (1740) | | | | Engine | Type | - | Water-cooled 3 cycle diesel | | | | Model | - | 3TNV70-XBV | | | | Output | hp(kW)/RPM | 13.5(10.0/2200 | | | | Performance | Max digging force.bucket / arm | Ibf (kN) | 3417(15.2)/1918(8.5) | | | | Traveling speed | MPH(km/h) | 2.7/1.3(4.3/2.1) | | | | Swing speed | RPM | 9.5 | | | | Boom swing angle, (L/R) | degrees | 42/65 | | | | Ground contact pressure | Rubber track | PSI (kPa) | 4.1 (28.6) | | | | Hydraulic system | Pump capacity | GPM | 4.6+4.6+3.5+2.6 | | | | (L/min) | 17.6+17.6+13.2+11.2 | | | | Main relief set pressure | PSI (MPa) | 2987(20.6) | | | | Undercarriage | Track type | - | Rubber | | | | Blade dimensions | Width x height | ft-in (mm) | 4'273T'X9"(1280/950X235) | | | | Fuel tank capacity | Gals (L) | 5.3(20) | | | | | | | | | | | |
| | | |
| | | |
| | | | | |
| | Hydraulic P.T.O | | | | | | | | | | | | | | | | | Moaei ~" ——Output | | | GPM (L/min) | | | | | SpecificatiomT ---- | | 2200RPM | | - - | 1250RPM | | | | Combined flow, double actions | 2417 (16671) | 8.1 (30.8) | 4.6 (17.5) | | | | | | | | | | | | | |
| | | |
| | | |
| | | |
| | | Note: All information presented in this Brochure is subject to change without notice. | | |
| | | |
| | | YANMAR AMERICA CORP. CONSTRUCTION EQUIPMENT DEPT. 101 International Parkway, Adairsville, GA 30103, U.S.A. TEL:770-877-7570 FAX.770-877-7572 http://www.yanmar.com | | |
| | | |
| | | Printed in Japan 000060K2810 0710I | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | |