| 1 .The rated lifting capacities that are indicated below are based on ISO 10567 and do not exceed 87% of the excavator's hydraulic lifting capacity or 75% of its static tilt load (tipping load) capacity. 2.The following operating criteria are also applicable to the calculation of these maximum loads; a) The "load point" is the location of the front bolt on the arm. b) The three indicated machine positions are : (i) arm over the front end (blade down): (ii) arm over the front end (blade up), and (iii) arm over the side (blade up). c) The operating cylinder is the boom cylinder. 3.The weight of the excavator's bucket, hook, sling and other lifting accessories have been taken into consideration when calculating these maximum loads. |