Catalogue - Excavators SV08-1 - YANMAR Construction

See other catalogues for YANMAR Construction

Engine, Loader, Backhoe loader, Welder, Excavator

Text version of the page

Jk^~ yanmar.

ULTRA-MÊME EXCAVATOR

Lifting capacity

Excavator equipped with ROPS and rubber crawlers r: Reach from swing center line : ft-in(mm) h: Lift point height: ft-in(mm) w: Lifting capacity : Ibs(kg) P: Load point

1 The rated lifting capacities that are indicated below are based on ISO 10567 and do not exceed 87% of the excavator's hydraulic lifting capacity or 75% of Its static tilt load (tipping load) capacity.

2.The following operating criteria are also applicable to the calculation of these maximum loads;

a) The "load point" Is the location of the front bolt on the arm.

b) The three indicated machine positions are : (I) arm over the front end (blade down),

(ii) arm over the front end (blade up), and (Iil) arm over the side (blade up).

c) The operating cylinder is the boom cylinder.

3.The weight of the excavator's bucket, hook, sling and other lifting accessories have been taken into consideration when calculating these maximum loads.

Rated over front

Rated over side

SV08-1

LIFT POINT HEIGHT

RATED LIFT CAPACITY OVER FRONT BLADE DOWN lbs (kg)

RATED LIFT CAPACITY OVER FRONT BLADE UP lbs (kg)

RATED LIFT CAPACITY OVER SIDE BLADE DOWN lbs (kg)

h:ft-in (mm)


	MAX	6'7" (2000)	4'11" (1500)	MIN	MAX	6'7" (2000)	4'11" (1500)	MIN	MAX	6'7" (2000)	4'11" (1500)	MIN
6'7"(2000)	*485(220)				419(190)				353(160)
4'11"(1500)	♦485(220)	♦485(220)	♦595(270)		331(150)	375(170)	♦529(240)		265(120)	331(150)	441(200)
3'3"(1000)	♦507(230)	♦573(260)	♦772(350)	♦1080(490)	287(130)	375(170)	617(280)	838(380)	243(110)	309(140)	507(230)	662(300)
1'8"(500)	♦529(240)	♦662(300)	♦1036(470)	♦1301(590)	287(130)	375(170)	573(260)	706(320)	221(100)	287(130)	463(210)	573(260)
Ground(0)	♦529(240)	♦706(320)	♦1058(480)	♦1389(630)	309(140)	375(170)	573(260)	750(340)	243(110)	287(130)	463(210)	595(270)
-1'8"(-500)	♦573(260)	♦617(280)	♦948(430)		375(170)	353(160)	595(270)		287(130)	287(130)	463(210)
-3'3"(-1000)	♦507(230)				♦507(230)				♦463(210)

Dimensions

ft-in

47"-4^,ir

5-S4"

3^,I0^,,-42^M

8^,I0^,,-8^,H^M

8^,6^M

9-94^M

6^,5^,,-6^,9¹

3^,I0^M

7.3..7.7..

1400-1500

I520-I620

II60-I260

2700-2730

2600

1220

2750-2850

1950-2050

II80

2200-2300

Note : The maximum loads marked with an asterisk (♦) were limited by the Excavator's hydraulic lifting capacity rather than by Its static tilt load (tipping load) capacity.


KL			M N O P Q R S
ft-in	7"-H"	2^,3^,,-2^,9^M	7"	5■■-9■■	9ⁿ-r	I^,9ⁿ	rr	6ⁿ-9,	2^,5„
mm	180-280	680-840	180	130-230	230-310	540	330	140-220	725

Standard equipment

(Please note that the standard equipment may vary from this list. Consult your Yanmar dealer for confirmation)

Blade

Boom swing function Rubber tracks Variable undercarriage Auxiliary valve and piping

(boom end)

Double acting PTO 2way control pattern change Cylinder cover (boom, blade)

Foldable ROPS

Standard seat

Seat belt Operation manual

Specifications



Operating weight	Rubber track	lbs(kg)	2348(1065)
Engine	Type		Water cooled 2-cylinder diesel
	Model		2TE 67L-BV
	Output	hp(kW)/RPM	I0.3(7.7)/2400
Performance	Max. digging force, bucket/arm Ibs(kN)		2360(I0.5)/I390(6.2)
	Traveling speed	MPH(km/h)	1.1(1.8)
	Swing speed	RPM	9
	Boom swing angle (L/R)	degrees	45°/90°
Ground contact pressure	Rubber track	PSI(kPa)	4,17(28.7)
Hydraulic system	Pump capacity	GPM	2.7+2.7
		(L/min)	(I0.3+I0.3)
	Main relief set pressure	PSI(MPa)	2625(18.1)
Blade dimensions	Width X height	ft-in(mm)	Z37 29" X 71680/840 X180)
Fuel tank capacity		Gals(L)	2.6(,0)

Note : All Information presented In this Brochure Is subject to change without notice.

YANMAR AMERICA CORP.

CONSTRUCTION EQUIPMENT DEPT.

101 International Parkway, Adairsville, GA 30103, U.S.A. TEL:770-877-7570 FAX:770-877-7572 http://www.yanmar.com

Hydraulic P.T.O.



—----Output Specification —----	PSI(MPa)	GPM(L/min)
—----Output Specification —----	PSI(MPa)	2400RPM
Combined flow, double actions	2625(,8.,)	5.2(,9.6)

YANMAR - YOUR BEST PARTNER FOR BUILDING THE FUTURE

Printed in Japan

Excavators SV08-1 - YANMAR Construction - #1

Engine, Loader, Backhoe loader, Welder, Excavator