PowerHV® XLPE Cable Test Field Up to 500kV |routine test
8Pages

XLPE Cable

Partial discharge level of power cable is closely related to its insulation properties and the change of partial discharge means there are defects that may endanger safe operation of the cable. So the accurate measurement of power cable partial discharge is the most effective way to check the performance of the cable insulation. As partial discharge measurement can find defects in a concentrative manner and bring very small damage to cable; experts, scholars and the international electric power authoritative organizations such as IEC, IEEE, CIGRE agree that: partial discharge test is the...

To test power cable with extruded insulation in accordance with IEC 60502 (6~30kV), IEC 60840 (30~150kV) and IEC 26027 (150~500kV) standards. The test includes AC voltage withstand test, partial discharge measurement and fault location. Rated Equipment Determined Voltage PDTest Tan 6 Heating Cycle Voltage Max. Voltage Test Voltage Test Meas. Voltage Test Rated Equipment Determined Voltage PDTest Tan 6 Heating Cycle Impulse Voltage Test after Voltage Max. Voltage Test Voltage Test Meas. Voltage Test Voltage Test Impulse Test Equipment Determined Max. Voltage Test Voltage Heating Cycle...

System configuration Insulated cylinder type reactor layout 2. Isolation transformer for main circuit control system ormer of control system wring system Power connections Shielded room Water conduit Metal tank type reactor layout rmer for main circuit control system brmer of control system uring system Power connections Shielded room Water conduit

Insulated cylinder type reactor: switchgear cabinet, regulator and filters to be placed out of the shielded room. All other components are installed in the shielded room. Metal tank type reactor: switchgear cabinet, regulator, filter, exciter transformer and reactor to be placed out of the shielded room. Reactor tank to be connected to the shielded room wall flange directly. Bushing goes through the wall into the shielded room. All other components are installed in the shielded room. The resonance principles of the two systems are the same. Input voltage is regulated by the regulator and...

Shielded Room The shielded room is constructed with concrete, insulation layer, light steel structure and shielding materials. Construction of each part is to follow the requirements of the general design of test equipment plans and the prescription of GB/T12190-2006 Test Method for High Performance Electromagnetic Shielded Room. Other facts such as ventilation and sound absorption are also taken into consideration. ■ Double-shielded static isolation power transformer ■ Fully shielded partial discharge test lab ■ Double-shielded static isolation control transformer ■ Control room ■...

■ Security: giving full consideration to the harm of operators and other people form high voltage test; alarm and indicator lights are used to tell the working condition of the test lab and whetherit is safe to enter. V ■ Reliability: in the design of the structure, factors such as easy to operate, process safety, V rationality, economy were fully taken into account; design and material selection of critical parts are V strict and reservation is made to ensure the reliability of the whole system. W ■ Practicability: the whole shielded room conforms to the relative national standards, easy...

shielded room for testing cable of 500kV (the whole drum) For further information please contact: /Yangzhou Xinyuan Electric Co., Ltd Wujian industrial park Yangzhou city, China